[Journal Article]
Verzugsreduzierung mittels Legierungsdesign für das Laser- und Elektronenstrahlschweißen
In: Im Blickpunkt, 54-59, 2023

Gamerdinger, Maximilian (Corresponding author)
Akyel, Fatma Nur

[Journal Article]
Microstructural Modification by Redesigning the Chemical Composition of Ni 620 Filler Metal
In: Advanced engineering materials, 2300318, 2023
[DOI: 10.1002/adem.202300318]

Bobzin, Kirsten
Heinemann, Hendrik
Erck, Marvin (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Influence of ring-shaped laser beam during welding of AW-5083 and AW-6082
In: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XII : 1-2 February 2023, San Francisco, California, United States / Stefan Kaierle, Klaus R. Kleine (editors) ; sponsored and published by: SPIE, 10 Seiten, 2023
[DOI: 10.1117/12.2649092]

Hollatz, Soeren
Hummel, Marc Daniel
Lach, Marie-Cathrin
Olowinsky, Alexander
Gillner, Arnold
et al.

[Contribution to a conference proceedings]
Direct measurement of the thermal conductivity depending on the thermal crystallisation conditions of injection moulding processes using flash-dsc
In: [SPE Antec], 2023

Hopmann, Christian
Alms, Jonathan Paul (Corresponding author)
Celik, Hakan

[Contribution to a conference proceedings]
Identification and compensation of part warpage in injection molding using on-cavity thermally sprayed heating coatings
In: SPE ANTEC Denver, 2023

Hopmann, Christian
Kahve, Cemi Emre (Corresponding author)
Fritsche, Daniel Colin
Kassel, Theresa
Bobzin, Kirsten
et al.

[Journal Article]
Modeling the Droplet Impact on the Substrate with Surface Preparation in Thermal Spraying with SPH
In: Journal of thermal spray technology : JTST, 32 (2/3), 599-608, 2023
[DOI: 10.1007/s11666-023-01534-0]

Bobzin, Kirsten
Heinemann, Hendrik
Jasutyn, Kevin (Corresponding author)
Jeske, Stefan Rhys
Bender, Jan Stephen
et al.

[Book, Dissertation / PhD Thesis]
Bestimmung des Dehnungsfeldes im schmelzbadnahen Bereich beim Lichtbogenschweißen
In: Aachener Berichte Fügetechnik 1/2023, 2023

Sharma, Rahul

[Contribution to a conference proceedings, Journal Article]
Injection molding of semi-crystalline polymers in a space-time framework
In: Proceedings in applied mathematics and mechanics : PAMM, 22 (1), e202200193, 2023
[DOI: 10.1002/pamm.202200193]

Ferrer Fabón, Blanca (Corresponding author)
Alms, Jonathan Paul
Behr, Marek
Hopmann, Christian

[Dissertation / PhD Thesis]
Coupled finite element and boundary element analysis for fluid-structure interaction with deformable shells, 2022
[DOI: 10.18154/RWTH-2022-11770]

Harmel, Maximilian

[Conference Presentation]
Crystallization Modelling for Polymer Injection Molding in a Space-Time Framework
In: 8. European Congress on Computational Methods in Applied Sciences and Engineering Oslo 2022-06-05 - 2022-06-09, 2022

Ferrer Fabón, Blanca (Corresponding author)
Gesenhues, Linda Gabriele
Behr, Marek

[Journal Article]
Fast octree neighborhood search for sph simulations
In: ACM transactions on graphics : TOG, 41 (6), 1-13, 2022
[DOI: 10.1145/3550454.3555523]

Fernandez Fernandez, Jose Antonio (Corresponding author)
Westhofen, Lukas
Löschner, Fabian
Jeske, Stefan Rhys
Longva, Andreas Borgen
et al.

[Preprint]
Simplex space-time meshes in engineering applications with moving domains, 2022
[DOI: 10.48550/arXiv.2210.09831]

Karyofylli, Violeta (Corresponding author)
Behr, Marek

[Contribution to a conference proceedings]
Automatic thermal mould design for optical parts in compression moulding
In: [31. Internationales Kolloquium Kunststofftechnik, 7. -8. September 2022, Aachen], 2022

Hopmann, Christian
Fritsche, Daniel Colin (Corresponding author)
Hohlweck, Tobias

[Contribution to a book, Contribution to a conference proceedings]
Microstructural influence of current assisted brazing on properties of nickel brazing alloys
In: Brazing, high temperature brazing and diffusion bonding, LÖT 2022 : proceedings and posters of the 13th international conference taking place in Aachen on 21th to 23th June 2022 / organized by DVS German Welding Society ; in kind collaboration with ASM International - Thermal Spray Society (TSS), Materials Park, American Welding Society (AWS), Miami, European Association for Brazing and Soldering (EABS), Congleton, L´Institut Belge de la Soudure (IBS), Brussels, International Institute of Welding (IIW), Villepinte, Nederlands Instituut voor Lastechniek (NIL), Zoetermeer, Brazing and Soldering Society - an affiliated Association of DVS, Düsseldorf, 76-82, 2022

Bobzin, Kirsten
Heinemann, Hendrik
Hebing, Julian (Corresponding author)

[Journal Article]
Investigation on the feasibility of strain measurement by in situ neutrondiffraction in the area of the weld pool during welding
In: Forces in Mechanics, 9, 100139, 2022
[DOI: 10.1016/j.finmec.2022.100139]

Sharma, Rahul (Corresponding author)
Hofmann, Michael
Reisgen, Uwe

[Journal Article]
In-situ x-ray phase contrast observation of the full penetration spot welding on limited aluminum material thickness
In: Journal of laser applications : JLA, 34 (4), 042019, 2022
[DOI: 10.2351/7.0000772]

Chung, Woo-Sik
Häusler, André
Hummel, Marc Daniel
Olowinsky, Alexander
Gillner, Arnold
et al.

[Contribution to a book, Contribution to a conference proceedings]
Potential Use of Plasma Sprayed Heating Coatings in Die Casting and Injection Molding
In: ITSC 2022 : International Thermal Spray Conference and Exposition May 4 - 6, 2022 Vienna, Austria : conference abstracts (including proceedings on USB stick) / organizers: DVS - German Welding Society, ASM International - Thermal Spray Society (TSS), IIW - International Institute of Welding, 220-225, 2022
[DOI: 10.31399/asm.cp.itsc2022p0220]

Gor, Shrujal (Corresponding author)
Hohlweck, Tobias
Fritsche, Daniel Colin
Schacht, Andreas
Wolff, Nino Kornelius
et al.

[Journal Article]
Validation of an extended objective function for the thermal optimisation of injection moulds
In: International journal of heat and mass transfer, 198, 123365, 2022
[DOI: 10.1016/j.ijheatmasstransfer.2022.123365]

Hopmann, Christian
Hohlweck, Tobias (Corresponding author)
Fritsche, Daniel Colin (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Investigating mechanical properties of laser beam weld seams with LTT-effect in 1.4307 and S235JR by tensile test and DIC
In: Procedia CIRP, 111, 420-424, 2022
[DOI: 10.1016/j.procir.2022.08.179]

Gamerdinger, Maximilian (Corresponding author)
Akyel, Fatma Nur
Olschok, Simon
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Measurement Routine for Analysing the Thermal Impact of Additive Manufacturing Processes on Deformation
In: ITSC 2022 : International Thermal Spray Conference and Exposition May 4 - 6, 2022 Vienna, Austria : conference abstracts (including proceedings on USB stick) / organizers: DVS - German Welding Society, ASM International - Thermal Spray Society (TSS), IIW - International Institute of Welding, 226-232, 2022
[DOI: 10.31399/asm.cp.itsc2022p0226]

Mäde, Konrad Arno Gregor (Corresponding author)
Oster, Lukas Emmanuel
Bold, Marie-Noemi
Reisgen, Uwe
Schleifenbaum, Johannes Henrich

[Journal Article]
Pore formation and melt pool analysis of laser welded Al-Cu joints using synchrotron radiation
In: Journal of materials processing technology, 309, 117738-117746, 2022
[DOI: 10.1016/j.jmatprotec.2022.117738]

Hollatz, S. (Corresponding author)
Hummel, Marc Daniel
Olowinsky, A.
Gillner, Arnold
Beckmann, F.
et al.

[Journal Article]
Modelling of the melting point shift in semi-crystalline thermoplastics dependent on prior cooling rate and heating rate
In: Polymer : the international journal for the science and technology of polymers, 254, 125100, 2022
[DOI: 10.1016/j.polymer.2022.125100]

Bölle, Simon
Alms, Jonathan Paul (Corresponding author)
Weihermüller, Max
Robisch, Meike
Wipperfürth, Jens
et al.

[Contribution to a book, Journal Article]
Residual Stress Reduction with the LTT Effect in Low Carbon Manganese-Steel through Chemical Composition Manipulation Using Dissimilar Filler Material in Laser Beam Welding
In: Metals : open access journal, 12 (6), 911, 2022
[DOI: 10.3390/met12060911]

Akyel, Fatma Nur (Corresponding author)
Gamerdinger, Maximilian
Olschok, Simon
Reisgen, Uwe
Schwedt, Alexander
et al.

[Contribution to a conference proceedings, Journal Article]
Adjustment of chemical composition with dissimilar filler wire in 1.4301 austenitic stainless steel to influence residual stress in laser beam welds
In: Journal of advanced joining processes, 5, 100081, 2021
[DOI: 10.1016/j.jajp.2021.100081]

Akyel, Fatma Nur (Corresponding author)
Gamerdinger, Maximilian
Olschok, Simon
Reisgen, Uwe
Schwedt, Alexander
et al.

[Journal Article]
Increase in Understanding of the welding process through simulation of laser beam and gas-shielded metal arc welding
In: Welding and Cutting, 21 (1), 56-63, 2022

Mokrov, Oleg
Simon, Marek Sebastian
Sharma, Rahul (Corresponding author)
Reisgen, Uwe
Schöler, Christoph
et al.

[Contribution to a book, Journal Article]
Variable Offset Computation Space for Automatic Cooling Dimensioning
In: Polymers, 14 (4), 762, 2022
[DOI: 10.3390/polym14040762]

Hopmann, Christian
Fritsche, Daniel Colin (Corresponding author)
Hohlweck, Tobias
Nehring-Wirxel, Julius Peter

[Book, Dissertation / PhD Thesis]
Inverse thermische Optimierung zur wissensbasierten thermischen Spritzgießwerkzeugauslegung
In: IKV-Berichte aus der Kunststoffverarbeitung 313, 2022

Hohlweck, Tobias

[Book, Dissertation / PhD Thesis]
Ermittlung der Temperaturverteilung in einer Kavität während des Spritzgießens mittels Ultraschalltomografie
In: IKV-Berichte aus der Kunststoffverarbeitung 314, 2022

Wipperfürth, Jens

[Journal Article]
Application and benchmark of SPH for modeling the impact in thermal spraying
In: Computational particle mechanics : CPM, 9, 1137-1152, 2022
[DOI: 10.1007/s40571-022-00459-9]

Jeske, Stefan Rhys (Corresponding author)
Bender, Jan Stephen
Bobzin, Kirsten
Heinemann, Hendrik
Jasutyn, Kevin
et al.

[Journal Article]
Capturing the Influence of Jet Fluctuations on Particles in Plasma Spraying
In: Journal of thermal spray technology, 31 (1/2), 59-69, 2022
[DOI: 10.1007/s11666-021-01307-7]

Bobzin, Kirsten
Heinemann, Hendrik (Corresponding author)
O'Brien, Andreas

[Contribution to a book, Journal Article]
Simulation of transient heat transfer and phase transformation in laser beam welding for low alloy steel and studying its influences on the welding residual stresses
In: Journal of advanced joining processes, 5, 100080, 2021
[DOI: 10.1016/j.jajp.2021.100080]

Krishna Murthy, Karthik Ravi (Corresponding author)
Akyel, Fatma Nur
Reisgen, Uwe
Olschok, Simon

[Journal Article]
Validation of evaporation-determined model of arc-cathode coupling in the peak current phase in pulsed GMA welding
In: Journal of physics / D, 55 (10), 105204, 2021
[DOI: 10.1088/1361-6463/ac3daa]

Simon, Marek Sebastian (Corresponding author)
Mokrov, Oleg
Sharma, Rahul
Reisgen, Uwe
Zhang, Guokai
et al.

[Journal Article]
Heat Transfer Coefficient Determination in a Gravity Die Casting Process with Local Air Gap Formation and Contact Pressure Using Experimental Evaluation and Numerical Simulation
In: International journal of metalcasting, 16 (2), 595-612, 2021
[DOI: 10.1007/s40962-021-00663-y]

Vossel, T. (Corresponding author)
Wolff, Nino Kornelius
Pustal, B.
Bührig-Polaczek, Andreas
Ahmadein, M.

[Journal Article]
Evaluating the Application of Heating Conductor Surfaces Inside Plasma Sprayed Coatings in Permanent Mold Metal Casting Processes for Local, Near-Surface Heat Release
In: International journal of metalcasting : IJMC, 16 (2), 585-594, 2021
[DOI: 10.1007/s40962-021-00660-1]

Vossel, Thomas (Corresponding author)
Gor, Shrujal
Pustal, Björn
Bührig-Polaczek, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Simplex Space-Time Meshes for Droplet Impact Dynamics
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 101-109, 2021
[DOI: 10.1007/978-3-030-70332-5_10]

Karyofylli, Violeta
Behr, Marek

[Contribution to a conference proceedings]
Path-planning Algorithm for the automatic generation of a cooling channel layout in injection moulds
In: [ANTEC 2021], 2021

Hopmann, Christian
Hohlweck, Tobias (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
New Opportunities for Brazing Research by in situ Experiments in a Large Chamber Scanning Electron Microscope
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 63-69, 2021
[DOI: 10.1007/978-3-030-70332-5_6]

Aretz, Anke (Corresponding author)
Iskandar, Mohamad Riza
Mayer, Joachim
Bobzin, Kirsten
Schmidt, Alexander
et al.

[Contribution to a conference proceedings]
Current-assisted diffusion brazing of Ni-based filler metals to hot work steel
In: [International Brazing and Soldering Conference 2021, IBSC 2021, Denver, USA], 2021

Bobzin, Kirsten
Heinemann, Hendrik
Hebing, Julian
Machado

[Contribution to a conference proceedings]
Influence of titanium inoculation on the microstructure of nickel-based filler metal
In: [International Brazing and Soldering Conference 2021, IBSC 2021, Denver, USA], 2021

Bobzin, Kirsten
Heinemann, Hendrik
Hebing, Julian

[Journal Article]
Development of an Experimental Setup to Investigate Influences on Component Distortion in Gravity Die Casting and a First Variation of Temperature Control Strategy
In: Metals : open access journal, 11 (12), 2028, 2021
[DOI: 10.3390/met11122028]

Wolff, Nino Kornelius (Corresponding author)
Hohlweck, Tobias
Vroomen, Uwe
Bührig-Polaczek, Andreas
Hopmann, Christian

[Contribution to a book, Contribution to a conference proceedings]
Evaluation and Transport of the Crystallization Heat in an Iterative Self-consistent Multi-scale Simulation of Semi-crystalline Thermoplastics
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 225-235, 2021
[DOI: 10.1007/978-3-030-70332-5_20]

Hopmann, Christian
Alms, Jonathan Paul (Corresponding author)
Laschet, Gottfried

[Contribution to a book, Journal Article]
Permeability Measurements of 3D Microstructures Generated by Phase Field Simulation of the Solidification of an Al-Si Alloy during Chill Casting
In: Metals : open access journal, 11 (12), 1895, 2021
[DOI: 10.3390/met11121895]

Berger, Ralf (Corresponding author)
Apel, Markus
Laschet, Gottfried
Jessen, Wilhelm
Schröder, Wolfgang
et al.

[Contribution to a conference proceedings]
Influence of the laser cutting front geometry on the striation formation analysed with high-speed synchrotron X-ray imaging
In: 18th Nordic Laser Materials Processing Conference (18th NOLAMP) 18th-20th January 2022, Luleå, Sweden, 012009, 1-9, 2021
[DOI: 10.1088/1757-899X/1135/1/012009]

Lind, Jannik (Corresponding author)
Hagenlocher, Christian
Blazquez-Sanchez, David
Hummel, Marc Daniel
Olowinsky, A.
et al.

[Contribution to a book, Journal Article]
High-Precision Adjustment of Welding Depth during Laser Micro Welding of Copper Using Superpositioned Spatial and Temporal Power Modulation
In: Journal of Manufacturing and Materials Processing, 5 (4), 127, 2021
[DOI: 10.3390/jmmp5040127]

Hummel, Marc Daniel (Corresponding author)
Häusler, André
Gillner, Arnold

[Journal Article]
Influence of the Titanium Inoculation on the Melting Behavior and Microstructure of Ni 620/X38CrMoV5-1 Brazing Joints
In: Advanced engineering materials, 23 (12), 2100497, 2021
[DOI: 10.1002/adem.202100497]

Bobzin, Kirsten
Wietheger, Wolfgang
Hebing, Julian (Corresponding author)

[Contribution to a conference proceedings]
Einsatz und Einflussnahme von thermisch gespritzten Heizschichten im variothermen Spritzgießprozess
In: [Technomer 2021 - 27. Fachtagung über Verarbeitung und Anwendung von Polymeren, 2021-11-04 - 2021-11-05, Chemnitz], 2021

Fritsche, Daniel Colin (Corresponding author)
Hopmann, Christian
Kahve, Cemi Emre
Hohlweck, Tobias
Bobzin, Kirsten
et al.

[Contribution to a conference proceedings]
Influence of Laser Metal Deposition Process Parameters on Geometric Accuracy and Residual Stress of IN718 Thin-walled Structures
In: [Metal Additive Manufacturing Conference 2021, MAMC, 2021-11-03 - 2021-11-05, Vienna, Austria], 103-112, 2021

Bold, Marie-Noemi
Stich, Jannik
Schleifenbaum, Johannes Henrich
Akyel, Fatma Nur
Reisgen, Uwe

[Book, Dissertation / PhD Thesis]
Multiscale modelling of plasma spraying
In: Schriftenreihe Oberflächentechnik 70, 2021
[DOI: 10.2370/9783844082630]

Alkhasli, Ilkin

[Journal Article]
Prediction and validation of the specific volume for inline warpage control in injection molding
In: Polymer testing, 104, 107393, 2021
[DOI: 10.1016/j.polymertesting.2021.107393]

Hopmann, Christian
Xiao, Chenglong (Corresponding author)
Kahve, Cemi Emre
Fellerhoff, Jan

[Contribution to a book, Contribution to a conference proceedings]
Micro-macro Coupled Solidification Simulations of a Sr-Modified Al-Si-Mg Alloy in Permanent Mould Casting
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 202-211, 2021
[DOI: 10.1007/978-3-030-70332-5_18]

Zhou, Bei (Corresponding author)
Behnken, Herfried
Eiken, Janin
Apel, Markus
Laschet, Gottfried
et al.

[Contribution to a book, Contribution to a conference proceedings]
Determination of the Heat Transfer Coefficient for a Liquid-Solid Contact in Gravity Die Casting Processes
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 191-201, 2021
[DOI: 10.1007/978-3-030-70332-5_17]

Vossel, Thomas (Corresponding author)
Pustal, Björn
Bührig-Polaczek, Andreas

[Journal Article]
Multi-physics modeling of side roughness generation mechanisms in powder bed fusion
In: Additive manufacturing, 47, 102274, 2021
[DOI: 10.1016/j.addma.2021.102274]

Wu, Chaochao
Zafar, Muhammad Qasim
Zhao, Haiyan (Corresponding author)
Wang, You
Schöler, Christoph
et al.

[Contribution to a book, Contribution to a conference proceedings]
TiO$_{x}$/Cr$_{2}$O$_{3}$ heating coatings for injection molding of polyamide
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 81-90, 2021
[DOI: 10.1007/978-3-030-70332-5_8]

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Schacht, Andreas (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Simulation of Multiple Particle Impacts in Plasma Spraying
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 91-100, 2021
[DOI: 10.1007/978-3-030-70332-5_9]

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Alkhasli, Ilkin (Corresponding author)

[Journal Article]
Particle tailored effective particle-gas interaction coefficients during plasma spraying
In: Thermal spray bulletin, 14 (1), 40-45, 2021

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Alkhasli, Ilkin

[Contribution to a book, Contribution to a conference proceedings]
Analysis of Radial Heat Transfer in an Injection Mold with Highly Dynamic Segmented Mold Tempering
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 215-224, 2021
[DOI: 10.1007/978-3-030-70332-5_19]

Hopmann, Christian
Kahve, Cemi Emre (Corresponding author)
Xiao, Cheng-Long

[Contribution to a book, Contribution to a conference proceedings]
Thermal Optimisation of Injection Moulds by Solving an Inverse Heat Conduction Problem
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 236-245, 2021
[DOI: 10.1007/978-3-030-70332-5_21]

Hopmann, Christian
Hohlweck, Tobias (Corresponding author)

[Contribution to a conference proceedings]
Capturing the Influence of Jet Fluctuations on Particles in Plasma Spraying
In: Thermal Spray 2021 : Proceedings from the International Thermal Spray Conference May 24-28, 2021 / F. Azarmi, X. Chen, J. Cizek, C. Cojocaru, B. Jodoin, H. Koivuluoto, Y. Lau, R. Fernandez, O. Ozdemir, H. Salami Jazi, and F. Toma, editors, 379-385, 2021
[DOI: 10.31399/asm.cp.itsc2021p0379]

Bobzin, Kirsten
Heinemann, Hendrik (Corresponding author)
O'Brien, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Parameter study on the electrical resistivity of plasma sprayed TiOx/Cr2O3 coatings
In: [22. Werkstofftechnisches Kolloquium, WTK 2021, 2021-03-24 - 2021-03-24, Chemnitz, Germany], 261-270, 2021

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Schacht, Andreas

[Multimedia]
High-speed synchrotron X-ray video of the laser beam cutting process in a 2 mm thick sheet of aluminium, 2021
[DOI: 10.18419/DARUS-1824]

Lind, Jannik
Hagenlocher, Christian
Blazquez-Sanchez, David
Hummel, Marc Daniel
Olowinsky, Alexander
et al.

[Multimedia]
Comparison of heat conduction mode and deep penetration mode by means of high-speed synchrotron X-ray videos during laser beam welding, 2021
[DOI: 10.18419/DARUS-2078]

Hagenlocher, Christian (Corresponding author)
Lind, Jannik
Wagner, Jonas
Hummel, Marc Daniel
Olowinsky, Alexander
et al.

[Journal Article]
Steigerung des Schweißprozessverständnisses durch Simulation des Laserstrahl- und des MSG-Schweißens
In: Schweissen und Schneiden, 73 (7), 428-435, 2021

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Sharma, Rahul
Reisgen, Uwe
Schöler, Christoph
et al.

[Multimedia]
Figure_3,6.avi", High-speed synchrotron X-ray video of the laser beam cutting process in a 2 mm thick sheet of aluminium, 2021
[DOI: 10.18419/DARUS-1824/1]

Lind, Jannik
Hagenlocher, Christian
Blazquez-Sanchez, David
Hummel, Marc Daniel
Olowinsky, Alexander
et al.

[Contribution to a book, Contribution to a conference proceedings]
Inverse Design Method for Injection Molding Cavity Shapes
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 256-263, 2021
[DOI: 10.1007/978-3-030-70332-5_23]

Zwicke, Florian (Corresponding author)
Elgeti, Stefanie Nicole

[Contribution to a book, Contribution to a conference proceedings]
Betrachtung der Entstehung von Heißrissen in AlCeMg-Legierungen im Schwerkraftkokillenguss
In: Tagungsband 4. Symposium Materialtechnik : 25. bis 26. Februar 2021 / Clausthaler Zentrum für Materialtechnik, 347-356, 2021
[DOI: 10.21268/20210519-19]

Wolff, Nino Kornelius (Corresponding author)
Sharma, Rahul (Corresponding author)
Vroomen, Uwe (Corresponding author)
Bührig-Polaczek, Andreas
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Simulation of thermally sprayed coating properties considering the splat boundaries
In: 22nd Chemnitz Seminar on Materials Engineering - 22. Werkstofftechnisches Kolloquium (WTK 2021), 24th March 2021, Chemnitz, Germany / editors: Prof. Thomas Lampke, Prof. Andreas Undisz, Prof. Guntram Wagner, Prof. Martin F.-X. Wagner, Institute of Materials Science and Engineering (IWW), Chemnitz University of Technology (TU Chemnitz), 1-11, 2021
[DOI: 10.1088/1757-899X/1147/1/012026]

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik (Corresponding author)
Wolf, Fabian

[Contribution to a book, Contribution to a conference proceedings]
Cutting Whistle : An Original Approach for Nozzle Design in Fiber Laser Cutting of Stainless Steel
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 267-276, 2021
[DOI: 10.1007/978-3-030-70332-5_24]

de Oliveira Lopes, M. (Corresponding author)
Petring, Dirk
Arntz-Schröder, Dennis
Schneider, Frank
Stoyanov, Stoyan
et al.

[Contribution to a book, Contribution to a conference proceedings]
Parameter study on the electrical resistivity of plasma sprayed TiO$_{x}$/Cr$_{2}$O$_{3}$ coatings
In: 22nd Chemnitz Seminar on Materials Engineering - 22. Werkstofftechnisches Kolloquium (WTK 2021), 24th March 2021, Chemnitz, Germany / editors: Prof. Thomas Lampke, Prof. Andreas Undisz, Prof. Guntram Wagner, Prof. Martin F.-X. Wagner, Institute of Materials Science and Engineering (IWW), Chemnitz University of Technology (TU Chemnitz), 012027, 1-10, 2021
[DOI: 10.1088/1757-899X/1147/1/012027]

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Schacht, Andreas (Corresponding author)

[Journal Article]
STEM investigations of the influence of copper on alumina scale detachment during in-situ wetting experiments of Al-7Si-0.3Mg alloy with 95Sn-5Cu filler metal
In: International journal of materials research : IJMR, 112 (5), 415-421, 2021
[DOI: 10.1515/ijmr-2020-8028]

Vayyala, Ashok
Aretz, Anke
Bobzin, Kirsten
Wietheger, Wolfgang
Hebing, Julian (Corresponding author)
et al.

[Contribution to a book, Journal Article]
Synchrotron X-ray Analysis of the Influence of the Magnesium Content on the Absorptance during Full-Penetration Laser Welding of Aluminum
In: Metals: open access journal, 11 (5), 797, 2021
[DOI: 10.3390/met11050797]

Wagner, Jonas (Corresponding author)
Hagenlocher, Christian
Hummel, Marc Daniel
Olowinsky, Alexander
Weber, Rudolf
et al.

[Book, Dissertation / PhD Thesis]
On the mechanism of evaporation-determined arc-cathode coupling in GMA welding
In: Aachener Berichte Fügetechnik 1/2021, 2021
[DOI: 10.18154/RWTH-2021-04680]

Simon, Marek Sebastian

[Journal Article]
In situ X-ray tomography investigations on laser welding of copper with 515 and 1030 nm laser beam sources
In: Journal of manufacturing processes, 67, 170-176, 2021
[DOI: 10.1016/j.jmapro.2021.04.063]

Hummel, Marc Daniel (Corresponding author)
Külkens, Mike (Corresponding author)
Schöler, Christoph
Schulz, Wolfgang
Gillner, Arnold

[Contribution to a book, Contribution to a conference proceedings]
Numerical Investigation of Keyhole Depth Formation in Micro Welding of Copper with 1030 nm and 515 nm Laser Radiation
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 29-39, 2021
[DOI: 10.1007/978-3-030-70332-5_3]

Schöler, Christoph (Corresponding author)
Nießen, Markus
Schulz, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Development of an In-Situ Observation Procedure for Hot Tear Formation in Aluminum Alloys in Gravity Die Casting
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 181-190, 2021
[DOI: 10.1007/978-3-030-70332-5_16]

Wolff, Nino Kornelius (Corresponding author)
Sharma, Rahul
Vroomen, Uwe
Bührig-Polaczek, Andreas
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
In-Situ Alloying in Gas Metal Arc Welding for Wire and Arc Additive Manufacturing
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 168-177, 2021
[DOI: 10.1007/978-3-030-70332-5_15]

Reisgen, Uwe
Sharma, Rahul
Oster, Lukas Emmanuel (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Validation of the EDACC Model for GMAW Process Simulation by Weld Pool Dimension Comparison
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 51-59, 2021
[DOI: 10.1007/978-3-030-70332-5_5]

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Shvartz, Ivan
Sharma, Rahul
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Simulation of Phase Transformation and Residual Stress of Low Alloy Steel in Laser Beam Welding
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 3-13, 2021
[DOI: 10.1007/978-3-030-70332-5_1]

Akyel, Fatma Nur (Corresponding author)
Reisgen, Uwe
Olschok, Simon
Murthy, Karthik

[Contribution to a book, Contribution to a conference proceedings]
Metallographic Comparison for Laser Welding of Cu-ETP and CuSn6 with Laser Beam Sources of 515 nm and 1030 nm Wavelength
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 14-28, 2021
[DOI: 10.1007/978-3-030-70332-5_2]

Hummel, Marc Daniel (Corresponding author)
Schöler, Christoph
Gillner, Arnold

[Dissertation / PhD Thesis]
Space-time finite element methods for production engineering applications, 2021
[DOI: 10.18154/RWTH-2021-02915]

Karyofylli, Violeta

[Journal Article]
High-Speed Video Analysis of the Process Stability in Plasma Spraying
In: Journal of thermal spray technology : JTST, 30 (4), 987-1000, 2021
[DOI: 10.1007/s11666-021-01159-1]

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin Andreas
Alkhasli, Ilkin
Heinemann, Hendrik (Corresponding author)

[Journal Article]
A comparison of predictive control strategies for a highly segmented injection mold tempering
In: Polymer, 218, 123494, 2021
[DOI: 10.1016/j.polymer.2021.123494]

Hopmann, Christian
Kahve, Cemi Emre (Corresponding author)
Schmitz, M.
Röbig, Malte

[Book, Dissertation / PhD Thesis]
Präzisionserhöhung beim Laserstrahl-Mikroschweißen durch angepasstes Energiemanagement
In: Ergebnisse aus der Lasertechnik, 2021
[DOI: 10.18154/RWTH-2021-01569]

Häusler, André

[Contribution to a conference proceedings, Journal Article]
Inverse Design Based on Nonlinear Thermoelastic Material Models
In: Proceedings in applied mathematics and mechanics : PAMM, 20 (1), e202000130, 2021
[DOI: 10.1002/pamm.202000130]

Zwicke, Florian (Corresponding author)
Hohlweck, Tobias
Hopmann, Christian
Elgeti, Stefanie Nicole

[Journal Article]
Thermally sprayed sensor coatings for spatially resolved temperature detection
In: Journal of materials processing technology, 291, 117043, 2021
[DOI: 10.1016/j.jmatprotec.2021.117043]

Bobzin, Kirsten
Wietheger, Wolfgang
Knoch, Martin Andreas
Heinemann, Hendrik
Schacht, Andreas (Corresponding author)
et al.

[Journal Article]
Investigation of an inverse thermal injection mould design methodology in dependence of the part geometry
In: International journal of material forming, 14 (2), 309-321, 2021
[DOI: 10.1007/s12289-020-01604-6]

Hopmann, Christian
Hohlweck, Tobias
Gerads, Jonas (Corresponding author)

[Journal Article]
Simulation of melt film dynamics in laser fusion cutting using a boundary layer approximation
In: International journal of heat and mass transfer, 168, 120837, 2021
[DOI: 10.1016/j.ijheatmasstransfer.2020.120837]

Halm, Ulrich (Corresponding author)
Nießen, Markus
Schulz, Wolfgang

[Journal Article]
An analysis of the melt flow permeability for evolving hypoeutectic Al-Si mushy zone microstructures by phase field simulations
In: Materialia, 15, 100966, 2020
[DOI: 10.1016/j.mtla.2020.100966]

Berger, R. (Corresponding author)
Apel, Markus
Laschet, G.

[Journal Article]
Simplified surface heat source distribution for GMAW process simulation based on the EDACC principle
In: Welding in the world, 65 (4), 745-752, 2021
[DOI: 10.1007/s40194-020-01042-7]

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Sharma, Rahul
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Towards Online-Prediction of Quality Features in Laser Fusion Cutting Using Neural Networks
In: Intelligent systems and applications : proceedings of the 2020 Intelligent Systems Conference (IntelliSys) / Kohei Arai, Supriya Kapoor, Rahul Bhatia, editors. - Volume 1, 346-359, 2020
[DOI: 10.1007/978-3-030-55180-3_26]

Halm, Ulrich (Corresponding author)
Arntz, Dennis
Gillner, Arnold
Schulz, Wolfgang

[Journal Article]
Reduction of distortion by using the low transformation temperature effect for high alloy steels in electron beam welding
In: Welding in the world, 65 (1), 23-34, 2020
[DOI: 10.1007/s40194-020-00993-1]

Akyel, Fatma Nur (Corresponding author)
Olschok, Simon
Reisgen, Uwe

[Journal Article]
Analyzing the Dynamics of the Laser Beam Cutting Process
In: PhotonicsViews, 17 (2), 43-47, 2020
[DOI: 10.1002/phvs.202000015]

Arntz, Dennis (Corresponding author)
Petring, Dirk

[Contribution to a book, Contribution to a conference proceedings]
Thermisch gespritzte Heizschichtsysteme für den Einsatz im Spritzgießen
In: DVS Congress 2020 : Große Schweißtechnische Tagung : DVS Campus : Vorträge der Online-Veranstaltungen vom 14. bis 18. September 2020 : (Kurzfassung der Vorträge; Langfassung Manuskripte auf USB-Karte)/ Veranstalter: DVS - Deutscher Verband für Schweißen und verwandte Verfahren e.V., Düsseldorf, 717-724, 2020

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Schacht, Andreas
Hopmann, Christian
et al.

[Contribution to a book, Contribution to a conference proceedings]
Increasing precision in injection moulding by controlled solidification
In: 30th International Colloquium Plastics Technology / editor: Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk an der RWTH Aachen - Lehrstuhl für Kunststoffverarbeitung, Prof. Dr.-Ing. Christian Hopmann, 615-660, 2020

Hopmann, Christian
Kech, Armin
Schmitz, Maximilian
Hohlweck, Tobias
Gerads, Jonas
et al.

[Contribution to a conference proceedings]
Modeling and simulation of laser micro welding
In: [Lasers in Manufacturing 2019, LiM2019, 2019-06-24 - 2019-06-27, Munich, Germany], 2020

Schöler, Christoph
Niessen, Markus
Schulz, Wolfgang

[Contribution to a conference proceedings, Journal Article]
New approaches on laser micro welding of copper by using a laser beam source with a wavelength of 450 nm
In: Journal of advanced joining processes, 1, 100012, 2020
[DOI: 10.1016/j.jajp.2020.100012]

Hummel, Marc Daniel (Corresponding author)
Schöler, Christoph
Häusler, André
Gillner, Arnold
Poprawe, Reinhart

[Journal Article]
Modeling of pressure-specific volume-temperature behavior of polymers considering the dependence of cooling and heating processes
In: Materials and design, 196, 109110, 2020
[DOI: 10.1016/j.matdes.2020.109110]

Wang, Jian (Corresponding author)
Hopmann, Christian
Röbig, Malte
Hohlweck, Tobias (Corresponding author)
Alms, Jonathan Paul

[Journal Article]
Measurement of specific volume of polymers under simulated injection molding processes
In: Materials and design, 196, 109136, 2020
[DOI: 10.1016/j.matdes.2020.109136]

Wang, Jian (Corresponding author)
Hopmann, Christian
Kahve, Cemi Emre
Hohlweck, Tobias
Alms, Jonathan Paul

[Contribution to a book, Journal Article]
A Statistical Evaluation of the Influence of Different Material and Process Parameters on the Heat Transfer Coefficient in Gravity Die Casting
In: Metals : open access journal, 10 (10), [1]-12, 2020
[DOI: 10.3390/met10101367]

Wolff, Nino Kornelius (Corresponding author)
Zimmermann, Golo
Vroomen, Uwe
Bührig-Polaczek, Andreas

[Contribution to a book, Journal Article]
Entwicklung einer Versuchskokille zur Untersuchung und thermischen Beeinflussung des Bauteilverzugs beim Schwerkraftkokillengießen
In: Giesserei / Special, 2020 (1), 14-23, 2020

Wolff, Nino Kornelius
Hohlweck, Tobias
Vroomen, Uwe
Bührig-Polaczek, Andreas
Hopmann, Christian

[Journal Article]
Influence of Die Temperature Control on Solidification and the Casting Process
In: International journal of metalcasting : IJMC, 14 (4), 907-925, 2020
[DOI: 10.1007/s40962-019-00391-4]

Vossel, Thomas (Corresponding author)
Wolff, Nino Kornelius
Pustal, B.
Bührig-Polaczek, Andreas

[Journal Article]
Calphad coupled phase-field model with mechano-chemical contributions and its application to rafting of γ’ in CMSX-4
In: Computational materials science, 184, 109909, 2020
[DOI: 10.1016/j.commatsci.2020.109909]

Böttger, Bernd (Corresponding author)
Apel, Markus
Budnitzki, Michael
Eiken, Janin
Laschet, Gottfried
et al.

[Contribution to a book, Contribution to a conference proceedings]
Multiscale solidification simulation of Sr-modified Al-Si-Mg alloy in die casting
In: MCWASP XV: International Conference on Modelling of Casting, Welding and Advanced Solidification Processes : 22-23 June 2020, Jönköping, Sweden / Jakob Olofsson, chairman MCWASP XV, School of Engineering, Jönköping University, Sweden, 012034, 1-8, 2020
[DOI: 10.1088/1757-899X/861/1/012034]

Zhou, Bei (Corresponding author)
Laschet, Gottfried
Eiken, Janin
Behnken, Herfried
Apel, Markus

[Contribution to a book, Contribution to a conference proceedings]
Analyse der Eigenspannungsverteilung von artfremd geschweißtem Stahl im Strahlschweißverfahren
In: DVS Congress 2020 : Große Schweißtechnische Tagung : DVS Campus : Vorträge der Online-Veranstaltungen vom 14. bis 18. September 2020 : (Kurzfassung der Vorträge; Langfassung Manuskripte auf USB-Karte)/ Veranstalter: DVS - Deutscher Verband für Schweißen und verwandte Verfahren e.V., Düsseldorf, 707-716, 2020

Akyel, Fatma Nur (Corresponding author)
Olschok, Simon
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Simulation des Lichtbogenansatzes beim MSG-Schweißen
In: DVS Congress 2020 : Große Schweißtechnische Tagung : DVS Campus : Vorträge der Online-Veranstaltungen vom 14. bis 18. September 2020 : (Kurzfassung der Vorträge; Langfassung Manuskripte auf USB-Karte)/ Veranstalter: DVS - Deutscher Verband für Schweißen und verwandte Verfahren e.V., Düsseldorf, 700-706, 2020

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Lozano Torrado, Philipp
Arntz, Dennis
Sharma, Rahul
et al.

[Contribution to a book, Contribution to a conference proceedings]
Einfluss von aktiven Kühlmethoden auf die Metallurgie von Duplexstählen bei der Verarbeitung mittels WAAM
In: DVS Congress 2020 : Große Schweißtechnische Tagung : DVS Campus : Vorträge der Online-Veranstaltungen vom 14. bis 18. September 2020 : (Kurzfassung der Vorträge; Langfassung Manuskripte auf USB-Karte)/ Veranstalter: DVS - Deutscher Verband für Schweißen und verwandte Verfahren e.V., Düsseldorf, 208-214, 2020

Reisgen, Uwe
Sharma, Rahul
Oster, Lukas Emmanuel (Corresponding author)
Christ, Martin Leonhard
Mann, Samuel Micha
et al.

[Journal Article]
SplineLib: A modern multi-purpose C++ spline library
In: Advances in engineering software, 146, 102826, 2020
[DOI: 10.1016/j.advengsoft.2020.102826]

Frings, Markus
Hosters, Norbert Michael
Müller, Corinna
Spahn, Max
Susen, Christoph Johann
et al.

[Journal Article]
Heating behaviour of plasma sprayed TiOx/Cr2O3 coatings for injection moulding
In: Surface and coatings technology, 399, 126199, 2020
[DOI: 10.1016/j.surfcoat.2020.126199]

Bobzin, Kirsten
Wietheger, Wolfgang
Knoch, Martin Andreas
Schacht, Andreas (Corresponding author)

[Journal Article]
Non-Isothermal Crystallisation Kinetics of Polypropylene at High Cooling Rates and Comparison to the Continuous Two-Domain pvT Model
In: Polymers, 12 (7), 1515, 2020
[DOI: 10.3390/polym12071515]

Alms, Jonathan Paul (Corresponding author)
Hopmann, Christian
Wang, Jian (Corresponding author)
Hohlweck, Tobias

[Journal Article]
Development of a novel control strategy for a highly segmented injection mold tempering for inline part warpage control
In: Polymer engineering & science, 60 (10), 2428-2438, 2020
[DOI: 10.1002/pen.25481]

Hopmann, Christian (Corresponding author)
Kahve, Cemi Emre
Schmitz, Mauritius

[Dissertation / PhD Thesis]
Inverse shape design in injection molding based on the finite element method, 2020
[DOI: 10.18154/RWTH-2020-07871]

Zwicke, Florian

[Journal Article]
Mushy zone solidification in a static thermal gradient : The effect of dendrite orientation
In: Materialia, 11, 100744, 2020
[DOI: 10.1016/j.mtla.2020.100744]

Boussinot, Guillaume (Corresponding author)
Apel, Markus
Hecht, Ulrike

[Journal Article]
Powder based laser material deposition on edges
In: Journal of laser applications : JLA, 32 (3), 032001, 2020
[DOI: 10.2351/7.0000095]

Bold, Marie-Noemi
Linnenbrink, Stefanie
Pirch, Norbert
Gasser, Andrés
Mund, Jana
et al.

[Contribution to a book, Journal Article]
Increasing the manufacturing efficiency of WAAM by advanced cooling strategies
In: Welding in the world, 64 (8), 1409-1416, 2020
[DOI: 10.1007/s40194-020-00930-2]

Reisgen, Uwe
Sharma, Rahul
Mann, Samuel Micha
Oster, Lukas Emmanuel (Corresponding author)

[Journal Article]
Comparison of Residual Stress Measurements Conducted by X-ray Stress Analysis and Incremental Hole Drilling Method
In: Journal of thermal spray technology : JTST, 29 (6), 1218-1228, 2020
[DOI: 10.1007/s11666-020-01056-z]

Bobzin, Kirsten
Wietheger, Wolfgang
Knoch, Martin Andreas
Schacht, Andreas (Corresponding author)
Reisgen, Uwe
et al.

[Journal Article]
Concept for the calculation of the distribution of heat input in the cathode area by GMA welding
In: Welding in the world, 64 (9), 1605-1614, 2020
[DOI: 10.1007/s40194-020-00929-9]

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Schiebahn, Alexander
Reisgen, Uwe

[Journal Article]
Investigation on the melt ejection and burr formation during laser fusion cutting of stainless steel
In: Journal of laser applications : JLA, 32 (2), 022068, 2020
[DOI: 10.2351/7.0000074]

Stoyanov, S.
Petring, D.
Arntz, Dennis
Günder, M.
Gillner, A.
et al.

[Journal Article]
Comparing 1070 nm and 515 nm Wavelength Laser Beam Sources in Terms of Efficiency for Laser Microwelding Copper
In: Lasers in engineering : LIE, 46 (1/4), 187-202, 2020

Hummel, Marc Daniel
Haeusler, André
Olowinsky, A.
Gillner, Arnold
Poprawe, Reinhart

[Journal Article]
Influence of direct electric current on wetting behavior during brazing
In: Frontiers of mechanical engineering, 15 (3), 496-503, 2020
[DOI: 10.1007/s11465-019-0582-6]

Bobzin, Kirsten
Wietheger, Wolfgang
Hebing, Julian
Zhao, Lidong
Schmidt, Alexander (Corresponding author)
et al.

[Contribution to a conference proceedings, Journal Article]
Investigating plasma keyhole welding with multiple wires for fusion welding with chemically graded weld seams
In: Journal of advanced joining processes, 1, 100024, 2020
[DOI: 10.1016/j.jajp.2020.100024]

Akyel, Fatma Nur (Corresponding author)
Oster, Lukas Emmanuel
Olschok, Simon
Sharma, Rahul
Reisgen, Uwe

[Journal Article]
Influence of mill scale on weld bead geometry and thermal cycle during GTA welding of high-strength steels
In: Welding in the world, 64, 1175-1183, 2020
[DOI: 10.1007/s40194-020-00910-6]

Sharma, Rahul (Corresponding author)
Reisgen, Uwe

[Contribution to a book, Journal Article]
Processing of Keyhole Depth Measurement Data during Laser Beam Micro Welding
In: Proceedings of the Institution of Mechanical Engineers / L, 234 (5), 722-731, 2020
[DOI: 10.1177/1464420720916759]

Hollatz, Sören (Corresponding author)
Hummel, Marc Daniel
Jaklen, Lea
Lipnicki, Wiktor
Olowinsky, Alexander
et al.

[Journal Article]
Prediction of effective elastic properties of a polypropylene component by an enhanced multiscale simulation of the injection molding process
In: Mechanics of materials, 140, 103225, 2019
[DOI: 10.1016/j.mechmat.2019.103225]

Laschet, Gottfried (Corresponding author)
Nokhostin, Hamed
Koch, Simon Christian
Meunier, Marc
Hopmann, Christian

[Journal Article]
Process dependence of pressure-specific volume-temperature measurement for amorphous polymer : Acrylonitrile-butadiene-styrene
In: Polymer testing, 81, 106232, 2019
[DOI: 10.1016/j.polymertesting.2019.106232]

Wang, Jian (Corresponding author)
Hopmann, Christian
Schmitz, Mauritius
Hohlweck, Tobias

[Journal Article]
Effects of evaporation-determined model of arc-cathode coupling on weld pool formation in GMAW process simulation
In: Welding in the world, 64 (5), 847-856, 2020
[DOI: 10.1007/s40194-020-00878-3]

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Sharma, Rahul
Reisgen, Uwe

[Journal Article]
Influence of the Injector Head Geometry on the Particle Injection in Plasma Spraying
In: Journal of thermal spray technology : JTST, 29 (4), 534-545, 2020
[DOI: 10.1007/s11666-020-01009-6]

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin Andreas
Heinemann, Hendrik (Corresponding author)

[Journal Article]
Finite element simulation of residual stress induced by high energy beam welding in dual phase steel
In: Lasers in manufacturing and materials processing, 7, 154-176, 2020
[DOI: 10.1007/s40516-020-00112-4]

Komerla, Krishna Chaitanya (Corresponding author)
Gach, Stefan
Akyel, Fatma Nur
Vossel, Thomas
Reisgen, Uwe
et al.

[Contribution to a book, Contribution to a conference proceedings]
Dissimilar material combination in laser beam welding : Reduction of distortion and residual stress
In: High-Power Laser Materials Processing : Applications, Diagnostics, and Systems IX : 4-5 February 2020, San Francisco, California, United States / Stefan Kaierle, Stefan W. Heinemann Editors ; Sponsored and Published by, 112730B, 1-14, 2020
[DOI: 10.1117/12.2543866]

Akyel, Fatma Nur (Corresponding author)
Olschok, Simon
Reisgen, Uwe

[Journal Article]
Continuous Two-Domain Equations of State for the Description of the Pressure-Specific Volume-Temperature Behavior of Polymers
In: Polymers, 12 (2), 409, 2020
[DOI: 10.3390/polym12020409]

Wang, Jian (Corresponding author)
Hopmann, Christian
Röbig, Malte
Hohlweck, Tobias (Corresponding author)
Kahve, Cemi Emre
et al.

[Journal Article]
Erratum: "Residual stress reduction of laser beam welds by use of low-transformation temperature (LTT) filler materials in carbon manganese steels - In situ diagnostic: Image correlation" [J. Laser Appl. 30, 032416 (2018)]
In: Journal of laser applications : JLA, 32 (1), 019901, 2020
[DOI: 10.2351/1.5133938]

Gach, Stefan
Olschok, Simon
Arntz, Dennis
Reisgen, Uwe

[Contribution to a conference proceedings]
Simulation of the Temperature Profile on the Cutting Edge in Laser Fusion Cutting
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 2019

Halm, Ulrich
Niessen, Markus
Arntz, Dennis
Gillner, Arnold
Schulz, Wolfgang

[Contribution to a conference proceedings]
Simulation of solidification microstructures under thermal conditions of laser beam welding
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 2019

Apel, Markus (Corresponding author)
Stryzhyboroda, Oleg
Boussinot, Guillaume
Böttger, Bernd

[Contribution to a book, Journal Article]
Einfluss der Spaltbildung und der schrumpfungsbedingten Kontaktdrücke auf die Entwicklung des Wärmeübergangs im Schwerkraftkokillenguss
In: Giesserei / Special, 2019 (2), 26-33, 2019

Vossel, Thomas
Pustal, Björn
Bührig-Polaczek, Andreas

[Contribution to a book, Journal Article]
Einfluss der Kokillentemperierung auf die Erstarrung beim Dauerformgießprozess
In: Giesserei / Special, 2019 (2), 34-45, 2019

Vossel, Thomas
Wolff, Nino Kornelius
Pustal, Björn
Bührig-Polaczek, Andreas

[Journal Article]
Laser-aided directed energy deposition of metal powder along edges
In: International journal of heat and mass transfer, 143, 118464, 2019
[DOI: 10.1016/j.ijheatmasstransfer.2019.118464]

Pirch, N.
Linnenbrink, S.
Gasser, A.
Schleifenbaum, Johannes Henrich (Corresponding author)

[Contribution to a conference proceedings]
Study of Laser Metal Deposition of IN718 on Inclined Planes: Influence of Inclination on Height and Width of Deposited Material
In: [Metal Additive Manufacturing Conference 2019, MAMC2019, 2019-11-25 - 2019-11-27, Örebro, Sweden], 2019

Bold, Marie-Noemi
Zielinski, Jonas
Ziegler, Stephan
Schleifenbaum, Johannes Henrich

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Comparison of the Thermal Properties of Industrially Used Die Coatings and a Plasma Sprayed YSZ Coating for Gravity Die Casting Applications
In: Transactions of the American Foundry Society, 127, 309-314, 2019

Wolff, Nino Kornelius
Krampe, Jan
Vroomen, Uwe
Bührig-Polaczek, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Identification of Relevant Parameters for a Gap and Pressure Dependent Heat Transfer Model for Different Cooling Conditions in Gravity Die Casting
In: [Liquid Metal Processing & Casting Conference, LMPC 2019, 2019-09-08 - 2019-09-11, Birmingham, UK], 319-326, 2019

Wolff, Nino Kornelius
Ahmadein, Mahmoud
Pustal, Björn
Bührig-Polaczek, Andreas

[Contribution to a conference proceedings]
Effects of Beam Power and Power Density Distribution on Process and Quality Issues during Fiber Laser Cutting of Stainless Steel Sheet Metal
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 2019

Petring, Dirk
Arntz, Dennis
Stoyanov, Stoyan
Schneider, Frank

[Journal Article]
YSZ-Dauerbeschichtung als Alternative zu Kokillenschlichten?
In: Giesserei : die Zeitschrift für Technik, Innovation und Management, 106, 24-31, 2019

Wolff, Nino Kornelius
Krampe, Jan
Vroomen, Uwe
Bührig-Polaczek, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Thermo-elasto-viscoplastic constitutive laws for metallic alloys during their solidification
In: Joint 5th International Conference on Advances in Solidification Processes (ICASP-5) & 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5) : 17-21 June 2019, Salzburg, Austria / Charles-André Gandin, MINES ParisTech, France; Menghuai Wu, University of Leoben, Austria, 012083, 2019
[DOI: 10.1088/1757-899X/529/1/012083]

Laschet, G. M. (Corresponding author)
Behnken, H. (Corresponding author)

[Contribution to a conference proceedings]
Quantitative Analysis of the Temporal Distance between Melt Waves on the Cutting Front Apex during Laser Fusion Cutting of Stainless-Steel Sheet Metal with 1 Micron Wavelength
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 9 Seiten, 2019

Arntz, Dennis
Petring, Dirk
Schneider, Frank
Stoyanov, Stoyan
Halm, Ulrich
et al.

[Contribution to a conference proceedings]
Simulative and experimental validation of an inversed cooling channel design for injection molds
In: 77th Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2019; Detroit; United States; 18 March 2019 through 21 March 2019 : Annual Technical Conference - ANTEC, Conference Proceedings, 6 Seiten, 2019

Hopmann, Christian
Fischer, Torben
Hohlweck, Tobias (Corresponding author)

[Journal Article]
Modeling of pvT behavior of semi-crystalline polymer based on the two-domain Tait equation of state for injection molding
In: Materials and design, 183, 108149, 2019
[DOI: 10.1016/j.matdes.2019.108149]

Wang, Jian (Corresponding author)
Hopmann, Christian
Schmitz, Mauritius
Hohlweck, Tobias
Wipperfürth, Jens

[Contribution to a book, Contribution to a conference proceedings]
Automatic cooling channel design for injection moulds
In: Proceedings of PPS-33 : the 33rd International Conference of the Polymer Processing Society - conference papers : Cancun, Mexico, 10-14 December 2017 / editors Octavio Manero, Fausto Calderas, 030004, 1-6, 2019
[DOI: 10.1063/1.5121657]

Hopmann, Christian
Theunissen, Matthias (Corresponding author)
Schneppe, Tobias
Schmitz, Mauritius

[Journal Article]
Simplex space-time meshes in thermally coupled two-phase flow simulations of mold filling
In: Computers & fluids, 192, 104261, 2019
[DOI: 10.1016/j.compfluid.2019.104261]

Karyofylli, Violeta (Corresponding author)
Wendling, Loic
Make, Michael Karl Petronella
Hosters, Norbert Michael
Behr, Marek

[Contribution to a book, Contribution to a conference proceedings]
Macroscopic Modelling of an Agglomerated and Sintered Particle in Air Plasma Spraying
In: ITSC 2019 : international thermal spray conference and exposition : 2019 conference proceedings / organized by: Thermal Spray Society, ASM International, DVS - German Welding Society, 8 Seiten, 2019

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin Andreas
Alkhasli, Ilkin (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Axisymmetric two-phase flow simulations on space-time meshes
In: Proceedings in applied mathematics and mechanics : PAMM, 19 (1), e201900409, 2019
[DOI: 10.1002/pamm.201900409]

Karyofylli, Violeta (Corresponding author)
Kamaldinova, Liubov
Simon, Marek Sebastian
Mokrov, Oleg
Reisgen, Uwe
et al.

[Contribution to a conference proceedings]
Effizienzsteigerung von Wire and Arc Additive Manufacturing durch Aerosolkühlung und Mehrdrahttechnologie
In: 1. Fachtagung Additive Manufacturing : 12. November 2019, Halle (Saale) : Vortragsband / DVS SLV Halle, 36-42, 2019

Reisgen, Uwe
Sharma, Rahul
Oster, Lukas Emmanuel (Corresponding author)
Mann, Samuel Micha

[Journal Article]
Influence of measurement processes on pressure-specific volume-temperature relationships of semi-crystalline polymer: Polypropylene
In: Polymer testing, 78, 105992, 2019
[DOI: 10.1016/j.polymertesting.2019.105992]

Wang, Jian (Corresponding author)
Hopmann, Christian
Schmitz, Mauritius
Hohlweck, Tobias (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
3D printing in steel construction with the automated Wire Arc Additive Manufacturing
In: ce/papers, 3 (3/4), 577-583, 2019
[DOI: 10.1002/cepa.1103]

Kühne, Ronny (Corresponding author)
Feldmann, Markus
Citarelli, Sandro
Reisgen, Uwe
Sharma, Rahul
et al.

[Journal Article]
Inverse design based on nonlinear thermoelastic material models applied to injection molding
In: Finite elements in analysis and design, 165, 65-76, 2019
[DOI: 10.1016/j.finel.2019.07.002]

Zwicke, Florian (Corresponding author)
Elgeti, Stefanie Nicole

[Contribution to a book, Contribution to a conference proceedings]
Influence of tin on the wetting behaviour of aluminum
In: Brazing, high temperature brazing and diffusion bonding : LÖT 2019 : lectures and posters of the 12th International Conference taking place in Aachen on 21th to 23th May 2019 / organised by DVS, 240-246, 2019

Bobzin, Kirsten
Öte, Mehmet
Wiesner, Stefanie
Schmidt, Alexander
Aretz, Anke
et al.

[Contribution to a conference proceedings]
Evaluation of Offline Path Planning for Laser Metal Deposition on Freeform Surfaces
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 7 Seiten, 2019

Bold, Marie-Noemi (Corresponding author)
Pirch, Nobert
Ziegler, Stephan
Schleifenbaum, Johannes Henrich

[Contribution to a conference proceedings]
Microstructure dependent effective elastic properties of a polypropylene plate via a multiscale simulation of the injection moulding process
In: [Clausthal-Göttingen International Workshop on Simulation Science, 2019-05-08 - 2019-05-10, Clausthal-Zellerfeld, Germany], 2019

Laschet, Gottfried (Corresponding author)
Koch, Simon Christian
Nokhostin, Hamed
Hopmann, Christian

[Contribution to a book, Contribution to a conference proceedings]
Eigenspannungs- und Verzugssimulation von Kohlenstoff-Mangan-Stählen im Elektronenstrahlschweißprozess
In: 39. Assistentenseminar Füge- und Schweißtechnik : Vorträge der gleichnamigen Veranstaltung in Eupen vom 12. bis 14. September 2018 / Institut für Schweißtechnik und Fügetechnik, RWTH Aachen [und 6 weitere] ; vom Institut für Schweißtechnik und Fügetechnik der RWTH Aachen veranstaltet, 78-86, 2019

Akyel, Fatma Nur (Corresponding author)
Olschok, Simon
Reisgen, Uwe

[Contribution to a conference proceedings]
In-situ diagnostic in laser beam welds with digital image correlation : Reduction of residual stress and distortion in laser beam welds using low-transformation-temperature (LTT) filler materials
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 102, 6 Seiten, 2019

Reisgen, Uwe
Olschok, Simon
Akyel, Fatma Nur (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
A study of coupled influence of evaporation and fluid flow inside a weld pool on welded seam formation in GMAW
In: Mathematical Modelling of Weld Phenomena 12 / edited by Christof Sommitsch, Institute of Materials Science, Joining and Forming, Graz University of Technology, Norbert Enzinger, Institute of Materials Science, Joining and Forming, Graz University of Technology, Peter Mayr, Institute of Joining and Assembly, Technische Universität Chemnitz ; TU Graz, Graz University of Technology, 81-90, 2019
[DOI: 10.3217/978-3-85125-615-4-06]

Mokrov, Oleg
Lisnyi, Oleksii (Corresponding author)
Simon, Marek Sebastian
Schiebahn, Alexander
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Evaporation-determined model for arc heat input in the cathode area by GMA welding
In: Mathematical Modelling of Weld Phenomena 12 / edited by Christof Sommitsch, Institute of Materials Science, Joining and Forming, Graz University of Technology, Norbert Enzinger, Institute of Materials Science, Joining and Forming, Graz University of Technology, Peter Mayr, Institute of Joining and Assembly, Technische Universität Chemnitz ; TU Graz, Graz University of Technology, 953-964, 2019
[DOI: 10.3217/978-3-85125-615-4-50]

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Schiebahn, Alexander
Reisgen, Uwe

[Contribution to a book, Journal Article]
Plasma multiwire technology with alternating wire feed for tailor-made material properties in wire and arc additive manufacturing
In: Metals : open access journal, 9, 745, 2019
[DOI: 10.3390/met9070745]

Reisgen, Uwe
Sharma, Rahul
Oster, Lukas Emmanuel (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Modelling of particle impact using modified momentum source method in thermal spraying
In: 21st Chemnitz Seminar on Materials Engineering : 6-7 March 2019, Chemnitz, Germany 21. Werkstofftechnisches Kolloquium, 012003, 2019
[DOI: 10.1088/1757-899X/480/1/012003]

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin Andreas
Alkhasli, Ilkin
Dokhanchi, Seyed Ruhollah (Corresponding author)

[Contribution to a book, Journal Article]
Arc-cathode attachment in GMA welding
In: Journal of physics / D, 52 (36), 364003, 2019
[DOI: 10.1088/1361-6463/ab2bd9]

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Sharma, Rahul
Reisgen, Uwe

[Journal Article]
Influence of spatial power modulation on pore and crack formation in laser beam welding of aluminum
In: Journal of laser applications : JLA, 31 (2), 022013, 2019
[DOI: 10.2351/1.5085460]

Heinen, Paul
Eichler, Jonas Felix Lambert
Haeusler, André
Olowinsky, Alexander
Aden, Mirko
et al.

[Journal Article]
In situ high speed diagnosis - A quantitative analysis of melt flow dynamics inside cutting kerfs during laser fusion cutting with 1 μm wavelength
In: Journal of laser applications : JLA, 31 (2), 022206, 2019
[DOI: 10.2351/1.5096091]

Arntz, Dennis
Petring, Dirk
Schneider, Frank
Poprawe, Reinhart

[Contribution to a book, Contribution to a conference proceedings]
A concept of an injection compression mould for non-invasive ultrasound tomographic temperature measurements
In: Proceedings of the Europe/Africa Conference Dresden 2017 - Polymer Processing Society PPS / Dresden, Germany, 27-29 June 2017 / editors Udo Wagenknecht, Petra Pötschke (Leibniz-Institut für Polymerforschung Dresden e.V., Dresden, Germany), Sven Wiessner (Technische Universität Dresden, Dresden, Germany), Michael Gehde (Technische Universität Chemnitz, Chemnitz, Germany), 070004, 1-4, 2019
[DOI: 10.1063/1.5084848]

Wipperfürth, Jens (Corresponding author)
Hopmann, Christian

[Contribution to a book, Contribution to a conference proceedings]
Temperature distribution on thermally sprayed heating conductor coatings
In: 21st Chemnitz Seminar on Materials Engineering, 1-11, 2019
[DOI: 10.1088/1757-899X/480/1/012002]

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin Andreas
Alkhasli, I. (Corresponding author)

[Journal Article]
The effect of beam oscillations on the microstructure and mechanical properties of electron beam welded steel joints
In: The international journal of advanced manufacturing technology, 102 (9/12), 2919-2931, 2019
[DOI: 10.1007/s00170-019-03355-4]

Komerla, Krishna Chaitanya (Corresponding author)
Gach, Stefan
Vossel, Thomas
Schwedt, Alexander
Bührig-Polaczek, Andreas
et al.

[Journal Article]
Macroscopic particle modeling in air plasma spraying
In: Surface and coatings technology, 364, 449-456, 2018
[DOI: 10.1016/j.surfcoat.2018.07.056]

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin Andreas
Alkhasli, Ilkin (Corresponding author)

[Journal Article]
Determination of the influence of welding parameters on the efficiency of electron beam welding by measurement of backscattered electrons
In: Vacuum : surface engineering, surface instrumentation & vacuum technology, 159, 182-185, 2018
[DOI: 10.1016/j.vacuum.2018.10.039]

Reisgen, Uwe
Olschok, Simon
Krichel, Thomas (Corresponding author)
Gach, Stefan

[Contribution to a book, Contribution to a conference proceedings]
Accelerated and Directed Diffusion during Electric Current-Assisted Brazing
In: 7th International Brazing and Soldering Conference 2018 : New Orleans, Lousiana, USA, 15-18 April 2018 / editors: Robin Gourley, Charles Walker ; sponsored and published by the American Welding Society, 126-129, 2019

Bobzin, Kirsten
Öte, Mehmet
Wiesner, Stefanie
Schmidt, Alexander

[Contribution to a conference proceedings, Journal Article]
Numerical Design for Primary Shaping Manufacturing Processes
In: Proceedings in applied mathematics and mechanics, 18 (1), e201800218, 2018
[DOI: 10.1002/pamm.201800218]

Zwicke, Florian (Corresponding author)
Schneppe, Tobias
Hopmann, Christian
Elgeti, Stefanie Nicole

[Contribution to a conference proceedings]
Controlling the local part properties using segmented temperature control in injection moulding
In: [ANTEC 2018 Conference and Tradeshow, ANTEC 2018, 2018-05-07 - 2018-05-10, Orlando, Florida, USA], 2018

Hopmann, Christian
Schmitz, Mauritius (Corresponding author)

[Book, Dissertation / PhD Thesis]
Simulation hochdynamischer Vorgänge in der Schmelze beim Laserstrahlschneiden
In: Ingenieurwissenschaften, 2018

Halm, Ulrich

[Journal Article]
Assessment of mechanical properties in high-strength steel weld metals by means of phase transformation temperature
In: Welding in the world, 62 (6), 1227-1236, 2018
[DOI: 10.1007/s40194-018-0605-7]

Sharma, Rahul (Corresponding author)
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Evaporation-based model for plasma-cathode attachement in GMA welding
In: Proceedings of the XXIInd International Conference on Gas Discharges and their Applications / editors: Prof. Zoran Lj. Petrović, Dr. Nevena Puač, Dr. Saša Dujko, Dr. Nikola Škoro ; Serbian Academy of Sciences and Arts, Institute of Physics, University of Belgrade. - Volume 2, 660-661, 2018

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Schiebahn, Alexander
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Evaporation-determined model for cathodic heating in GMA welding
In: Proceedings of the XXIInd International Conference on Gas Discharges and their Applications / editors: Prof. Zoran Lj. Petrović, Dr. Nevena Puač, Dr. Saša Dujko, Dr. Nikola Škoro ; Serbian Academy of Sciences and Arts, Institute of Physics, University of Belgrade. - Volume 1, 87-90, 2018

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Schiebahn, Alexander
Reisgen, Uwe

[Journal Article]
Temperature field and residual stress distribution for laser metal deposition
In: Journal of laser applications, 30 (3), 032503, 2018
[DOI: 10.2351/1.5040634]

Pirch, Norbert
Niessen, Markus
Linnenbrink, Stefanie
Schopphoven, Thomas
Gasser, Andres
et al.

[Contribution to a conference proceedings, Journal Article]
Quantitative study of melt flow dynamics inside laser cutting kerfs by in-situ high-speed video-diagnostics
In: Procedia CIRP, 74, 640-644, 2018
[DOI: 10.1016/j.procir.2018.08.057]

Arntz, Dennis (Corresponding author)
Petring, Dirk
Stoyanov, Stoyan
Quiring, N.
Poprawe, Reinhart

[Journal Article]
In situ investigation of production processes in a large chamber scanning electron microscope
In: Ultramicroscopy, 193, 151-158, 2018
[DOI: 10.1016/j.ultramic.2018.07.002]

Aretz, Anke
Ehle, Lisa Christine
Häusler, André
Bobzin, Kirsten
Öte, Mehmet
et al.

[Journal Article]
Development of a Segmented Temperature Control for Targeted Solidification in Injection Molding
In: International polymer processing, 33 (2), 206-216, 2018
[DOI: 10.3139/217.3452]

Hopmann, Christian
Schmitz, Mauritius (Corresponding author)
Dornebusch, Hanna

[Contribution to a book, Contribution to a conference proceedings]
Digitalisierung der Werkzeugentwicklung beim Präzisionsspritzgießen
In: Kunststoffindustrie 4.0 : 29. Internationales Kolloquium Kunststofftechnik / Herausgeber: Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk an der RWTH Aachen, Lehrstuhl für Kunststoffverarbeitung, Prof. Dr.-Ing Christian Hopmann, 489-532, 2018

Hopmann, Christian
Wehr, H.
Schmitz, Mauritius
Schneppe, Tobias (Corresponding author)
Theunissen, Matthias

[Journal Article]
Residual stress reduction of laser beam welds by use of low-transformation-temperature (LTT) filler materials in carbon manganese steels - In situ diagnostic: Image correlation
In: Journal of laser applications : JLA, 30 (3), 032416, 2018
[DOI: 10.2351/1.5040599]

Gach, Stefan (Corresponding author)
Olschok, Simon
Arntz, Dennis
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Adaptive temporal refinement in injection molding
In: Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018 / editors: Livan Fratini, Rosa Di Lorenzo, Gianluca Buffa, Guiseppe Ingaro (University of Palermo, Palermo, Italy). - A, 2018
[DOI: 10.1063/1.5034934]

Karyofylli, Violeta (Corresponding author)
Schmitz, Mauritius (Corresponding author)
Hopmann, Christian
Behr, Marek

[Book, Dissertation / PhD Thesis]
Inverse thermische Spritzgießwerkzeugauslegung auf Basis des lokalen Kühlbedarfs
In: IKV-Berichte aus der Kunststoffverarbeitung 283, 2018

Nikoleizig, Philipp

[Contribution to a book]
Schweißprozesssimulation - Simulationsgestützte Erforschung der physikalischen Prozesse verschiedener Schweissverfahren
In: ISF, Welding and Joining Institute, RWTH Aachen University / herausgegeben vom Institut für Wissenschaftliche Veröffentlichungen und der ALPHA Informationsgesellschaft mbH ; redaktionelle Zusammenarbeit: Institut für Schweißtechnik und Fügetechnik (IFS) an der RWTH Aachen University, 60-63, 2018

Simon, Marek Sebastian (Corresponding author)
Schmidt, Andre
Mokrov, Oleg

[Journal Article]
Minimization of Warpage for Injection Molded Parts by Inverse Thermal Mold Design
In: International polymer processing, 33 (1), 110-116, 2018
[DOI: 10.3139/217.3451]

Hopmann, Christian
Nikoleizig, Philipp
Dornebusch, Hanna (Corresponding author)
Schneppe, Tobias

[Journal Article]
Numerical investigation of droplet impact on the welding pool in gas metal arc welding
In: Materials science and engineering technology = Materialwissenschaft und Werkstofftechnik, 48 (12), 1206-1212, 2017
[DOI: 10.1002/mawe.201700147]

Mokrov, Oleg
Lisnyi, Oleksii (Corresponding author)
Simon, Marek Sebastian
Reisgen, Uwe
Laschet, G.
et al.

[Journal Article]
Influence on martensite-start-temperature and volume expansion of low-transformation-temperature materials used for residual stress relief in beam welding
In: Materialwissenschaft und Werkstofftechnik, 48 (12), 1276-1282, 2017
[DOI: 10.1002/mawe.201700159]

Reisgen, Uwe
Olschok, Simon
Sharma, Rahul
Gach, Stefan (Corresponding author)

[Journal Article]
Residual stress measurement in AlSi alloys
In: Materialwissenschaft und Werkstofftechnik = Materialwissenschaft und Werkstofftechnik, 48 (12), 1270-1275, 2017
[DOI: 10.1002/mawe.201700157]

Reisgen, Uwe
Sharma, Rahul (Corresponding author)
Gach, Stefan
Olschok, Simon
Francis, J.
et al.

[Journal Article]
Characterisation of quasi-stationary temperature fields in laser welding by infrared thermography
In: Materials science and engineering technology = Materialwissenschaft und Werkstofftechnik, 48 (12), 1283-1289, 2017
[DOI: 10.1002/mawe.201700160]

Francis, J. A. (Corresponding author)
Gach, Stefan (Corresponding author)
Olschok, Simon
Reisgen, Uwe
Häusler, André
et al.

[Conference Presentation]
In-situ-visualization of multiple reflections on the cut flank during laser cutting with 1 micron wavelength
In: International Congress on Applications & electro-optics Atlanta, GA 2017-10-22 - 2017-10-26, 2017

Arntz, Dennis
Petring, Dirk
Stoyanov, Stoyan
Jansen, Ulrich
Schneider, Frank
et al.

[Journal Article]
In-situ strain measurement of submerged arc welding process through application of electronic Speckle pattern interferometry
In: Journal of Welding and Joining, 35 (4), 82-88, 2017
[DOI: 10.5781/JWJ.2017.35.4.12]

Reisgen, Uwe
Sharma, Rahul (Corresponding author)

[Journal Article]
Confirmation of tensile residual stress reduction in electron beam welding using low transformation temperature materials (LTT) as localized metallurgical injections - Part 2: Residual stress measurement
In: Materials testing, 59 (7-8), 618-624, 2017
[DOI: 10.3139/120.111046]

Gach, Stefan (Corresponding author)
Olschok, Simon
Francis, John Anthony
Reisgen, Uwe

[Journal Article]
Comparative study of phase transformation temperatures in high strength steel weld metals
In: Materials testing = Materialprüfung, 59 (4), 344-347, 2017
[DOI: 10.3139/120.111003]

Sharma, Rahul (Corresponding author)
Reisgen, Uwe

[Journal Article]
Nachweis der Zugeigenspannungsreduzierung in Electronenstrahlschweißnähten durch Verwendung von Low-Transformation-Temperature Werkstoffen (LTT) als lokale metallurgische Injektion : Teil 1: Metallographische Analyse
In: Materials testing, 59 (2), 148-154, 2017
[DOI: 10.3139/120.110957]

Gach, Stefan (Corresponding author)
Schwedt, Alexander
Olschok, Simon
Reisgen, Uwe
Mayer, Joachim

[Contribution to a book, Contribution to a conference proceedings]
Comparison of submerged arc welding process modification influence on thermal strain by in-situ neutron diffraction
In: Residual stresses 2016 : ICRS-10 : 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016 / Thomas M. Holden, Ondrej Muránsky, Lyndon Edwards (Institute of Materials Engineering, Australian Nuclear Science & Technology Organization, Locked Bag 2001, Kirrawee DC, Sydney, NSW 2232, Australia), 533-538, 2017
[DOI: 10.21741/9781945291173-90]

Sharma, Rahul (Corresponding author)
Reisgen, Uwe
Hofmann, Michael

[Contribution to a book, Contribution to a conference proceedings]
Mathematical model of an arc welding weld seam formation on the basis of three dimensional CFD simulations
In: Mathematical modelling of weld phenomena 11 : contains the papers presented at the 11th International Seminar 'Numerical Analysis of Weldability', held from September 27 to 30, 2015 at Schloss Seggau near Graz, Austria / edited by Christof Sommitsch (Institute of Materials Science and Welding, Graz University of Technology), Norbert Enzinger (Institute of Materials Science and Welding, Graz University of Technology), Peter Mayr (Institute of Joining and Assembly, Technische Universität Chemnitz) ; TU Graz, Graz University of Technology, 753-772, 2016

Reisgen, Uwe
Mokrov, Oleg (Corresponding author)
Lisnyi, Oleksii

[Dissertation / PhD Thesis]
Understanding multi-arc plasma spraying
In: Schriftenreihe Oberflächentechnik 44, 2016

Öte, Mehmet

[Journal Article]
Nutzung von Low-Transformation-Temperature-Werkstoffen (LTT) zur Eigenspannungsreduzierung im Elektronenstrahlschweißprozess
In: Materialwissenschaft und Werkstofftechnik, 47 (7), 589-599, 2016
[DOI: 10.1002/mawe.201600549]

Reisgen, Uwe
Olschok, Simon
Gach, Stefan (Corresponding author)