-
Source
Authors and Contributors
-
Hopmann, Christian
Fritsche, Daniel (Corresponding author)
Hohlweck, Tobias
Nehring-Wirxel, Julius Peter
-
Hohlweck, Tobias
-
Wipperfürth, Jens
-
Jeske, Stefan Rhys (Corresponding author)
Bender, Jan Stephen
Bobzin, Kirsten
Heinemann, Hendrik
Jasutyn, Kevin
et al.
-
Krishna Murthy, Karthik Ravi (Corresponding author)
Akyel, Fatma Nur
Reisgen, Uwe
Olschok, Simon
-
Simon, Marek Sebastian (Corresponding author)
Mokrov, Oleg
Sharma, Rahul
Reisgen, Uwe
Zhang, Guokai
et al.
-
Vossel, T. (Corresponding author)
Wolff, Nino Kornelius
Pustal, B.
Bührig-Polaczek, Andreas
Ahmadein, M.
-
Vossel, Thomas (Corresponding author)
Gor, Shrujal
Pustal, Björn
Bührig-Polaczek, Andreas
-
[Contribution to a book, Contribution to a conference proceedings]
New Opportunities for Brazing Research by in situ Experiments in a Large Chamber Scanning Electron Microscope In: Enhanced Material, Parts Optimization and Process Intensification : Proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / edited by Uwe Reisgen, Dietmar Drummer, Holger Marschall, 63-69, 2021
[DOI:
10.1007/978-3-030-70332-5_6]
Aretz, Anke (Corresponding author)
Iskandar, Mohamad Riza
Mayer, Joachim
Bobzin, Kirsten
Schmidt, Alexander
et al.
-
Bobzin, Kirsten
Heinemann, Hendrik
Hebing, Julian
Machado
-
Bobzin, Kirsten
Heinemann, Hendrik
Hebing, Julian
-
Schluse, Michael
Roßmann, Heinz-Jürgen
-
Wolff, Nino Kornelius (Corresponding author)
Hohlweck, Tobias
Vroomen, Uwe
Bührig-Polaczek, Andreas
Hopmann, Christian
-
Hopmann, Christian
Alms, Jonathan Paul
Laschet, Gottfried
-
Berger, Ralf (Corresponding author)
Apel, Markus
Laschet, Gottfried
Jessen, Wilhelm
Schröder, Wolfgang
et al.
-
Lind, Jannik (Corresponding author)
Hagenlocher, Christian
Blazquez-Sanchez, David
Hummel, Marc Daniel
Olowinsky, A.
et al.
-
Hummel, Marc Daniel (Corresponding author)
Häusler, André
Gillner, Arnold
-
Bobzin, Kirsten
Wietheger, Wolfgang
Hebing, Julian (Corresponding author)
-
Fritsche, Daniel Colin (Corresponding author)
Hopmann, Christian
Kahve, Cemi Emre
Hohlweck, Tobias
Bobzin, Kirsten
et al.
-
Bold, Marie-Noemi
Stich, Jannik
Schleifenbaum, Johannes Henrich
Akyel, Fatma Nur
Reisgen, Uwe
-
Alkhasli, Ilkin
-
Hopmann, Christian
Xiao, Chenglong (Corresponding author)
Kahve, Cemi Emre
Fellerhoff, Jan
-
[Contribution to a book, Contribution to a conference proceedings]
Micro-macro Coupled Solidification Simulations of a Sr-Modified Al-Si-Mg Alloy in Permanent Mould Casting In: Enhanced Material, Parts Optimization and Process Intensification : Proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall Editor, 202-211, 2021
[DOI:
10.1007/978-3-030-70332-5_18]
Zhou, Bei (Corresponding author)
Behnken, Herfried
Eiken, Janin
Apel, Markus
Laschet, Gottfried
et al.
-
[Contribution to a book, Contribution to a conference proceedings]
Determination of the Heat Transfer Coefficient for a Liquid-Solid Contact in Gravity Die Casting Processes In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 191-201, 2021
[DOI:
10.1007/978-3-030-70332-5_17]
Vossel, Thomas (Corresponding author)
Pustal, Björn
Bührig-Polaczek, Andreas
-
Wu, Chaochao
Zafar, Muhammad Qasim
Zhao, Haiyan (Corresponding author)
Wang, You
Schöler, Christoph
et al.
-
[Contribution to a book, Contribution to a conference proceedings]
TiO$_{x}$/Cr$_{2}$O$_{3}$ heating coatings for injection molding of polyamide In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 81-90, 2021
[DOI:
10.1007/978-3-030-70332-5_8]
Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Schacht, Andreas (Corresponding author)
-
[Contribution to a book, Contribution to a conference proceedings]
Simulation of Multiple Particle Impacts in Plasma Spraying In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 91-100, 2021
[DOI:
10.1007/978-3-030-70332-5_9]
Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Alkhasli, Ilkin (Corresponding author)
-
Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Alkhasli, Ilkin
-
[Contribution to a book, Contribution to a conference proceedings]
Analysis of Radial Heat Transfer in an Injection Mold with Highly Dynamic Segmented Mold Tempering In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 215-224, 2021
[DOI:
10.1007/978-3-030-70332-5_19]
Hopmann, Christian
Kahve, Cemi Emre (Corresponding author)
Xiao, Cheng-Long
-
[Contribution to a book, Contribution to a conference proceedings]
Thermal Optimisation of Injection Moulds by Solving an Inverse Heat Conduction Problem In: Enhanced Material, Parts Optimization and Process Intensification : Proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 236-245, 2021
[DOI:
10.1007/978-3-030-70332-5_21]
Hopmann, Christian
Hohlweck, Tobias (Corresponding author)
-
[Contribution to a conference proceedings]
Capturing the Influence of Jet Fluctuations on Particles in Plasma Spraying In: Thermal Spray 2021 : Proceedings from the International Thermal Spray Conference May 24-28, 2021 / F. Azarmi, X. Chen, J. Cizek, C. Cojocaru, B. Jodoin, H. Koivuluoto, Y. Lau, R. Fernandez, O. Ozdemir, H. Salami Jazi, and F. Toma, editors, 379-385, 2021
[DOI:
10.31399/asm.cp.itsc2021p0379]
Bobzin, Kirsten
Heinemann, Hendrik (Corresponding author)
O'Brien, Andreas
-
Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik (Corresponding author)
Wolf, F.
-
Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Schacht, Andreas
-
Lind, Jannik
Hagenlocher, Christian
Blazquez-Sanchez, David
Hummel, Marc Daniel
Olowinsky, Alexander
et al.
-
Hagenlocher, Christian
Lind, Jannik
Wagner, Jonas
Hummel, Marc Daniel
Olowinsky, Alexander
et al.
-
Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Sharma, Rahul
Reisgen, Uwe
Schöler, Christoph
et al.
-
Lind, Jannik
Hagenlocher, Christian
Blazquez-Sanchez, David
Hummel, Marc Daniel
Olowinsky, Alexander
et al.
-
[Contribution to a book, Contribution to a conference proceedings]
Inverse Design Method for Injection Molding Cavity Shapes In: Enhanced Material, Parts Optimization and Process Intensification : Proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editor, 256-263, 2021
[DOI:
10.1007/978-3-030-70332-5_23]
Zwicke, Florian (Corresponding author)
Elgeti, Stefanie Nicole
-
Wolff, Nino Kornelius (Corresponding author)
Sharma, Rahul (Corresponding author)
Vroomen, Uwe (Corresponding author)
Bührig-Polaczek, Andreas
Reisgen, Uwe
-
Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik (Corresponding author)
Wolf, Fabian
-
[Contribution to a book, Contribution to a conference proceedings]
Cutting Whistle : An Original Approach for Nozzle Design in Fiber Laser Cutting of Stainless Steel In: Enhanced Material, Parts Optimization and Process Intensification : Proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 267-276, 2021
[DOI:
10.1007/978-3-030-70332-5_24]
de Oliveira Lopes, M. (Corresponding author)
Petring, Dirk
Arntz-Schröder, Dennis
Schneider, Frank
Stoyanov, Stoyan
et al.
-
Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Schacht, Andreas (Corresponding author)
-
Vayyala, Ashok
Aretz, Anke
Bobzin, Kirsten
Wietheger, Wolfgang
Hebing, Julian (Corresponding author)
et al.
-
Wagner, Jonas (Corresponding author)
Hagenlocher, Christian
Hummel, Marc Daniel
Olowinsky, Alexander
Weber, Rudolf
et al.
-
Simon, Marek Sebastian
-
Hummel, Marc Daniel (Corresponding author)
Külkens, Mike (Corresponding author)
Schöler, Christoph
Schulz, Wolfgang
Gillner, Arnold
-
[Contribution to a book, Contribution to a conference proceedings]
Numerical Investigation of Keyhole Depth Formation in Micro Welding of Copper with 1030 nm and 515 nm Laser Radiation In: Enhanced Material, Parts Optimization and Process Intensification : Proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 29-39, 2021
[DOI:
10.1007/978-3-030-70332-5_3]
Schöler, Christoph (Corresponding author)
Nießen, Markus
Schulz, Wolfgang
-
[Contribution to a book, Contribution to a conference proceedings]
Development of an In-Situ Observation Procedure for Hot Tear Formation in Aluminum Alloys in Gravity Die Casting In: Enhanced Material, Parts Optimization and Process Intensification : Proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / edited by Uwe Reisgen, Dietmar Drummer, Holger Marschall, 181-190, 2021
[DOI:
10.1007/978-3-030-70332-5_16]
Wolff, Nino Kornelius (Corresponding author)
Sharma, Rahul
Vroomen, Uwe
Bührig-Polaczek, Andreas
Reisgen, Uwe
-
[Contribution to a book, Contribution to a conference proceedings]
In-Situ Alloying in Gas Metal Arc Welding for Wire and Arc Additive Manufacturing In: Enhanced Material, Parts Optimization and Process Intensification : Proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / edited by Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 168-177, 2021
[DOI:
10.1007/978-3-030-70332-5_15]
Reisgen, Uwe
Sharma, Rahul
Oster, Lukas Emmanuel (Corresponding author)
-
[Contribution to a book, Contribution to a conference proceedings]
Validation of the EDACC Model for GMAW Process Simulation by Weld Pool Dimension Comparison In: Enhanced Material, Parts Optimization and Process Intensification : Proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 51-59, 2021
[DOI:
10.1007/978-3-030-70332-5_5]
Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Shvartz, Ivan
Sharma, Rahul
Reisgen, Uwe