[Contribution to a book, Contribution to a conference proceedings]
Determination of the Heat Transfer Coefficient for a Liquid-Solid Contact in Gravity Die Casting Processes
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 191-201, 2021
[DOI: 10.1007/978-3-030-70332-5_17]

Vossel, Thomas (Corresponding author)
Pustal, Björn
Bührig-Polaczek, Andreas

[Journal Article]
Multi-physics modeling of side roughness generation mechanisms in powder bed fusion
In: Additive manufacturing, 47, 102274, 2021
[DOI: 10.1016/j.addma.2021.102274]

Wu, Chaochao
Zafar, Muhammad Qasim
Zhao, Haiyan (Corresponding author)
Wang, You
Schöler, Christoph
et al.

[Contribution to a book, Contribution to a conference proceedings]
TiO$_{x}$/Cr$_{2}$O$_{3}$ heating coatings for injection molding of polyamide
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 81-90, 2021
[DOI: 10.1007/978-3-030-70332-5_8]

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Schacht, Andreas (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Simulation of Multiple Particle Impacts in Plasma Spraying
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 91-100, 2021
[DOI: 10.1007/978-3-030-70332-5_9]

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Alkhasli, Ilkin (Corresponding author)

[Journal Article]
Particle tailored effective particle-gas interaction coefficients during plasma spraying
In: Thermal spray bulletin, 14 (1), 40-45, 2021

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Alkhasli, Ilkin

[Contribution to a book, Contribution to a conference proceedings]
Analysis of Radial Heat Transfer in an Injection Mold with Highly Dynamic Segmented Mold Tempering
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 215-224, 2021
[DOI: 10.1007/978-3-030-70332-5_19]

Hopmann, Christian
Kahve, Cemi Emre (Corresponding author)
Xiao, Cheng-Long

[Contribution to a book, Contribution to a conference proceedings]
Thermal Optimisation of Injection Moulds by Solving an Inverse Heat Conduction Problem
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 236-245, 2021
[DOI: 10.1007/978-3-030-70332-5_21]

Hopmann, Christian
Hohlweck, Tobias (Corresponding author)

[Contribution to a conference proceedings]
Capturing the Influence of Jet Fluctuations on Particles in Plasma Spraying
In: Thermal Spray 2021 : Proceedings from the International Thermal Spray Conference May 24-28, 2021 / F. Azarmi, X. Chen, J. Cizek, C. Cojocaru, B. Jodoin, H. Koivuluoto, Y. Lau, R. Fernandez, O. Ozdemir, H. Salami Jazi, and F. Toma, editors, 379-385, 2021
[DOI: 10.31399/asm.cp.itsc2021p0379]

Bobzin, Kirsten
Heinemann, Hendrik (Corresponding author)
O'Brien, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Parameter study on the electrical resistivity of plasma sprayed TiOx/Cr2O3 coatings
In: [22. Werkstofftechnisches Kolloquium, WTK 2021, 2021-03-24 - 2021-03-24, Chemnitz, Germany], 261-270, 2021

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Schacht, Andreas

[Multimedia]
High-speed synchrotron X-ray video of the laser beam cutting process in a 2 mm thick sheet of aluminium, 2021
[DOI: 10.18419/DARUS-1824]

Lind, Jannik
Hagenlocher, Christian
Blazquez-Sanchez, David
Hummel, Marc Daniel
Olowinsky, Alexander
et al.

[Multimedia]
Comparison of heat conduction mode and deep penetration mode by means of high-speed synchrotron X-ray videos during laser beam welding, 2021
[DOI: 10.18419/DARUS-2078]

Hagenlocher, Christian (Corresponding author)
Lind, Jannik
Wagner, Jonas
Hummel, Marc Daniel
Olowinsky, Alexander
et al.

[Journal Article]
Steigerung des Schweißprozessverständnisses durch Simulation des Laserstrahl- und des MSG-Schweißens
In: Schweissen und Schneiden, 73 (7), 428-435, 2021

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Sharma, Rahul
Reisgen, Uwe
Schöler, Christoph
et al.

[Multimedia]
Figure_3,6.avi", High-speed synchrotron X-ray video of the laser beam cutting process in a 2 mm thick sheet of aluminium, 2021
[DOI: 10.18419/DARUS-1824/1]

Lind, Jannik
Hagenlocher, Christian
Blazquez-Sanchez, David
Hummel, Marc Daniel
Olowinsky, Alexander
et al.

[Contribution to a book, Contribution to a conference proceedings]
Inverse Design Method for Injection Molding Cavity Shapes
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 256-263, 2021
[DOI: 10.1007/978-3-030-70332-5_23]

Zwicke, Florian (Corresponding author)
Elgeti, Stefanie Nicole

[Contribution to a book, Contribution to a conference proceedings]
Betrachtung der Entstehung von Heißrissen in AlCeMg-Legierungen im Schwerkraftkokillenguss
In: Tagungsband 4. Symposium Materialtechnik : 25. bis 26. Februar 2021 / Clausthaler Zentrum für Materialtechnik, 347-356, 2021
[DOI: 10.21268/20210519-19]

Wolff, Nino Kornelius (Corresponding author)
Sharma, Rahul (Corresponding author)
Vroomen, Uwe (Corresponding author)
Bührig-Polaczek, Andreas
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Simulation of thermally sprayed coating properties considering the splat boundaries
In: 22nd Chemnitz Seminar on Materials Engineering - 22. Werkstofftechnisches Kolloquium (WTK 2021), 24th March 2021, Chemnitz, Germany / editors: Prof. Thomas Lampke, Prof. Andreas Undisz, Prof. Guntram Wagner, Prof. Martin F.-X. Wagner, Institute of Materials Science and Engineering (IWW), Chemnitz University of Technology (TU Chemnitz), 1-11, 2021
[DOI: 10.1088/1757-899X/1147/1/012026]

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik (Corresponding author)
Wolf, Fabian

[Contribution to a book, Contribution to a conference proceedings]
Cutting Whistle : An Original Approach for Nozzle Design in Fiber Laser Cutting of Stainless Steel
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 267-276, 2021
[DOI: 10.1007/978-3-030-70332-5_24]

de Oliveira Lopes, M. (Corresponding author)
Petring, Dirk
Arntz-Schröder, Dennis
Schneider, Frank
Stoyanov, Stoyan
et al.

[Contribution to a book, Contribution to a conference proceedings]
Parameter study on the electrical resistivity of plasma sprayed TiO$_{x}$/Cr$_{2}$O$_{3}$ coatings
In: 22nd Chemnitz Seminar on Materials Engineering - 22. Werkstofftechnisches Kolloquium (WTK 2021), 24th March 2021, Chemnitz, Germany / editors: Prof. Thomas Lampke, Prof. Andreas Undisz, Prof. Guntram Wagner, Prof. Martin F.-X. Wagner, Institute of Materials Science and Engineering (IWW), Chemnitz University of Technology (TU Chemnitz), 012027, 1-10, 2021
[DOI: 10.1088/1757-899X/1147/1/012027]

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Schacht, Andreas (Corresponding author)

[Journal Article]
STEM investigations of the influence of copper on alumina scale detachment during in-situ wetting experiments of Al-7Si-0.3Mg alloy with 95Sn-5Cu filler metal
In: International journal of materials research : IJMR, 112 (5), 415-421, 2021
[DOI: 10.1515/ijmr-2020-8028]

Vayyala, Ashok
Aretz, Anke
Bobzin, Kirsten
Wietheger, Wolfgang
Hebing, Julian (Corresponding author)
et al.

[Contribution to a book, Journal Article]
Synchrotron X-ray Analysis of the Influence of the Magnesium Content on the Absorptance during Full-Penetration Laser Welding of Aluminum
In: Metals: open access journal, 11 (5), 797, 2021
[DOI: 10.3390/met11050797]

Wagner, Jonas (Corresponding author)
Hagenlocher, Christian
Hummel, Marc Daniel
Olowinsky, Alexander
Weber, Rudolf
et al.

[Book, Dissertation / PhD Thesis]
On the mechanism of evaporation-determined arc-cathode coupling in GMA welding
In: Aachener Berichte Fügetechnik 1/2021, 2021
[DOI: 10.18154/RWTH-2021-04680]

Simon, Marek Sebastian

[Journal Article]
In situ X-ray tomography investigations on laser welding of copper with 515 and 1030 nm laser beam sources
In: Journal of manufacturing processes, 67, 170-176, 2021
[DOI: 10.1016/j.jmapro.2021.04.063]

Hummel, Marc Daniel (Corresponding author)
Külkens, Mike (Corresponding author)
Schöler, Christoph
Schulz, Wolfgang
Gillner, Arnold

[Contribution to a book, Contribution to a conference proceedings]
Numerical Investigation of Keyhole Depth Formation in Micro Welding of Copper with 1030 nm and 515 nm Laser Radiation
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 29-39, 2021
[DOI: 10.1007/978-3-030-70332-5_3]

Schöler, Christoph (Corresponding author)
Nießen, Markus
Schulz, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Development of an In-Situ Observation Procedure for Hot Tear Formation in Aluminum Alloys in Gravity Die Casting
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 181-190, 2021
[DOI: 10.1007/978-3-030-70332-5_16]

Wolff, Nino Kornelius (Corresponding author)
Sharma, Rahul
Vroomen, Uwe
Bührig-Polaczek, Andreas
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
In-Situ Alloying in Gas Metal Arc Welding for Wire and Arc Additive Manufacturing
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 168-177, 2021
[DOI: 10.1007/978-3-030-70332-5_15]

Reisgen, Uwe
Sharma, Rahul
Oster, Lukas Emmanuel (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Validation of the EDACC Model for GMAW Process Simulation by Weld Pool Dimension Comparison
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 51-59, 2021
[DOI: 10.1007/978-3-030-70332-5_5]

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Shvartz, Ivan
Sharma, Rahul
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Simulation of Phase Transformation and Residual Stress of Low Alloy Steel in Laser Beam Welding
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 3-13, 2021
[DOI: 10.1007/978-3-030-70332-5_1]

Akyel, Fatma Nur (Corresponding author)
Reisgen, Uwe
Olschok, Simon
Murthy, Karthik

[Contribution to a book, Contribution to a conference proceedings]
Metallographic Comparison for Laser Welding of Cu-ETP and CuSn6 with Laser Beam Sources of 515 nm and 1030 nm Wavelength
In: Enhanced Material, Parts Optimization and Process Intensification : proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editors, 14-28, 2021
[DOI: 10.1007/978-3-030-70332-5_2]

Hummel, Marc Daniel (Corresponding author)
Schöler, Christoph
Gillner, Arnold

[Dissertation / PhD Thesis]
Space-time finite element methods for production engineering applications, 2021
[DOI: 10.18154/RWTH-2021-02915]

Karyofylli, Violeta

[Journal Article]
High-Speed Video Analysis of the Process Stability in Plasma Spraying
In: Journal of thermal spray technology : JTST, 30 (4), 987-1000, 2021
[DOI: 10.1007/s11666-021-01159-1]

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin Andreas
Alkhasli, Ilkin
Heinemann, Hendrik (Corresponding author)

[Journal Article]
A comparison of predictive control strategies for a highly segmented injection mold tempering
In: Polymer, 218, 123494, 2021
[DOI: 10.1016/j.polymer.2021.123494]

Hopmann, Christian
Kahve, Cemi Emre (Corresponding author)
Schmitz, M.
Röbig, Malte

[Book, Dissertation / PhD Thesis]
Präzisionserhöhung beim Laserstrahl-Mikroschweißen durch angepasstes Energiemanagement
In: Ergebnisse aus der Lasertechnik, 2021
[DOI: 10.18154/RWTH-2021-01569]

Häusler, André

[Contribution to a conference proceedings, Journal Article]
Inverse Design Based on Nonlinear Thermoelastic Material Models
In: Proceedings in applied mathematics and mechanics : PAMM, 20 (1), e202000130, 2021
[DOI: 10.1002/pamm.202000130]

Zwicke, Florian (Corresponding author)
Hohlweck, Tobias
Hopmann, Christian
Elgeti, Stefanie Nicole

[Journal Article]
Thermally sprayed sensor coatings for spatially resolved temperature detection
In: Journal of materials processing technology, 291, 117043, 2021
[DOI: 10.1016/j.jmatprotec.2021.117043]

Bobzin, Kirsten
Wietheger, Wolfgang
Knoch, Martin Andreas
Heinemann, Hendrik
Schacht, Andreas (Corresponding author)
et al.

[Journal Article]
Investigation of an inverse thermal injection mould design methodology in dependence of the part geometry
In: International journal of material forming, 14 (2), 309-321, 2021
[DOI: 10.1007/s12289-020-01604-6]

Hopmann, Christian
Hohlweck, Tobias
Gerads, Jonas (Corresponding author)

[Journal Article]
Simulation of melt film dynamics in laser fusion cutting using a boundary layer approximation
In: International journal of heat and mass transfer, 168, 120837, 2021
[DOI: 10.1016/j.ijheatmasstransfer.2020.120837]

Halm, Ulrich (Corresponding author)
Nießen, Markus
Schulz, Wolfgang

[Journal Article]
An analysis of the melt flow permeability for evolving hypoeutectic Al-Si mushy zone microstructures by phase field simulations
In: Materialia, 15, 100966, 2020
[DOI: 10.1016/j.mtla.2020.100966]

Berger, R. (Corresponding author)
Apel, Markus
Laschet, G.

[Journal Article]
Simplified surface heat source distribution for GMAW process simulation based on the EDACC principle
In: Welding in the world, 65 (4), 745-752, 2021
[DOI: 10.1007/s40194-020-01042-7]

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Sharma, Rahul
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Towards Online-Prediction of Quality Features in Laser Fusion Cutting Using Neural Networks
In: Intelligent systems and applications : proceedings of the 2020 Intelligent Systems Conference (IntelliSys) / Kohei Arai, Supriya Kapoor, Rahul Bhatia, editors. - Volume 1, 346-359, 2020
[DOI: 10.1007/978-3-030-55180-3_26]

Halm, Ulrich (Corresponding author)
Arntz, Dennis
Gillner, Arnold
Schulz, Wolfgang

[Journal Article]
Reduction of distortion by using the low transformation temperature effect for high alloy steels in electron beam welding
In: Welding in the world, 65 (1), 23-34, 2020
[DOI: 10.1007/s40194-020-00993-1]

Akyel, Fatma Nur (Corresponding author)
Olschok, Simon
Reisgen, Uwe

[Journal Article]
Analyzing the Dynamics of the Laser Beam Cutting Process
In: PhotonicsViews, 17 (2), 43-47, 2020
[DOI: 10.1002/phvs.202000015]

Arntz, Dennis (Corresponding author)
Petring, Dirk

[Contribution to a book, Contribution to a conference proceedings]
Thermisch gespritzte Heizschichtsysteme für den Einsatz im Spritzgießen
In: DVS Congress 2020 : Große Schweißtechnische Tagung : DVS Campus : Vorträge der Online-Veranstaltungen vom 14. bis 18. September 2020 : (Kurzfassung der Vorträge; Langfassung Manuskripte auf USB-Karte)/ Veranstalter: DVS - Deutscher Verband für Schweißen und verwandte Verfahren e.V., Düsseldorf, 717-724, 2020

Bobzin, Kirsten
Wietheger, Wolfgang
Heinemann, Hendrik
Schacht, Andreas
Hopmann, Christian
et al.

[Contribution to a book, Contribution to a conference proceedings]
Increasing precision in injection moulding by controlled solidification
In: 30th International Colloquium Plastics Technology / editor: Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk an der RWTH Aachen - Lehrstuhl für Kunststoffverarbeitung, Prof. Dr.-Ing. Christian Hopmann, 615-660, 2020

Hopmann, Christian
Kech, Armin
Schmitz, Maximilian
Hohlweck, Tobias
Gerads, Jonas
et al.

[Contribution to a conference proceedings]
Modeling and simulation of laser micro welding
In: [Lasers in Manufacturing 2019, LiM2019, 2019-06-24 - 2019-06-27, Munich, Germany], 2020

Schöler, Christoph
Niessen, Markus
Schulz, Wolfgang

[Contribution to a conference proceedings, Journal Article]
New approaches on laser micro welding of copper by using a laser beam source with a wavelength of 450 nm
In: Journal of advanced joining processes, 1, 100012, 2020
[DOI: 10.1016/j.jajp.2020.100012]

Hummel, Marc Daniel (Corresponding author)
Schöler, Christoph
Häusler, André
Gillner, Arnold
Poprawe, Reinhart

[Journal Article]
Modeling of pressure-specific volume-temperature behavior of polymers considering the dependence of cooling and heating processes
In: Materials and design, 196, 109110, 2020
[DOI: 10.1016/j.matdes.2020.109110]

Wang, Jian (Corresponding author)
Hopmann, Christian
Röbig, Malte
Hohlweck, Tobias (Corresponding author)
Alms, Jonathan Paul

[Journal Article]
Measurement of specific volume of polymers under simulated injection molding processes
In: Materials and design, 196, 109136, 2020
[DOI: 10.1016/j.matdes.2020.109136]

Wang, Jian (Corresponding author)
Hopmann, Christian
Kahve, Cemi Emre
Hohlweck, Tobias
Alms, Jonathan Paul

[Contribution to a book, Journal Article]
A Statistical Evaluation of the Influence of Different Material and Process Parameters on the Heat Transfer Coefficient in Gravity Die Casting
In: Metals : open access journal, 10 (10), [1]-12, 2020
[DOI: 10.3390/met10101367]

Wolff, Nino Kornelius (Corresponding author)
Zimmermann, Golo
Vroomen, Uwe
Bührig-Polaczek, Andreas

[Contribution to a book, Journal Article]
Entwicklung einer Versuchskokille zur Untersuchung und thermischen Beeinflussung des Bauteilverzugs beim Schwerkraftkokillengießen
In: Giesserei / Special, 2020 (1), 14-23, 2020

Wolff, Nino Kornelius
Hohlweck, Tobias
Vroomen, Uwe
Bührig-Polaczek, Andreas
Hopmann, Christian

[Journal Article]
Influence of Die Temperature Control on Solidification and the Casting Process
In: International journal of metalcasting : IJMC, 14 (4), 907-925, 2020
[DOI: 10.1007/s40962-019-00391-4]

Vossel, Thomas (Corresponding author)
Wolff, Nino Kornelius
Pustal, B.
Bührig-Polaczek, Andreas