[Journal Article]
Calphad coupled phase-field model with mechano-chemical contributions and its application to rafting of γ’ in CMSX-4
In: Computational materials science, 184, 109909, 2020
[DOI: 10.1016/j.commatsci.2020.109909]

Böttger, Bernd (Corresponding author)
Apel, Markus
Budnitzki, Michael
Eiken, Janin
Laschet, Gottfried
et al.

[Contribution to a book, Contribution to a conference proceedings]
Multiscale solidification simulation of Sr-modified Al-Si-Mg alloy in die casting
In: MCWASP XV: International Conference on Modelling of Casting, Welding and Advanced Solidification Processes : 22-23 June 2020, Jönköping, Sweden / Jakob Olofsson, chairman MCWASP XV, School of Engineering, Jönköping University, Sweden, 012034, 1-8, 2020
[DOI: 10.1088/1757-899X/861/1/012034]

Zhou, Bei (Corresponding author)
Laschet, Gottfried
Eiken, Janin
Behnken, Herfried
Apel, Markus

[Contribution to a book, Contribution to a conference proceedings]
Analyse der Eigenspannungsverteilung von artfremd geschweißtem Stahl im Strahlschweißverfahren
In: DVS Congress 2020 : Große Schweißtechnische Tagung : DVS Campus : Vorträge der Online-Veranstaltungen vom 14. bis 18. September 2020 : (Kurzfassung der Vorträge; Langfassung Manuskripte auf USB-Karte)/ Veranstalter: DVS - Deutscher Verband für Schweißen und verwandte Verfahren e.V., Düsseldorf, 707-716, 2020

Akyel, Fatma Nur (Corresponding author)
Olschok, Simon
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Simulation des Lichtbogenansatzes beim MSG-Schweißen
In: DVS Congress 2020 : Große Schweißtechnische Tagung : DVS Campus : Vorträge der Online-Veranstaltungen vom 14. bis 18. September 2020 : (Kurzfassung der Vorträge; Langfassung Manuskripte auf USB-Karte)/ Veranstalter: DVS - Deutscher Verband für Schweißen und verwandte Verfahren e.V., Düsseldorf, 700-706, 2020

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Lozano Torrado, Philipp
Arntz, Dennis
Sharma, Rahul
et al.

[Contribution to a book, Contribution to a conference proceedings]
Einfluss von aktiven Kühlmethoden auf die Metallurgie von Duplexstählen bei der Verarbeitung mittels WAAM
In: DVS Congress 2020 : Große Schweißtechnische Tagung : DVS Campus : Vorträge der Online-Veranstaltungen vom 14. bis 18. September 2020 : (Kurzfassung der Vorträge; Langfassung Manuskripte auf USB-Karte)/ Veranstalter: DVS - Deutscher Verband für Schweißen und verwandte Verfahren e.V., Düsseldorf, 208-214, 2020

Reisgen, Uwe
Sharma, Rahul
Oster, Lukas Emmanuel (Corresponding author)
Christ, Martin Leonhard
Mann, Samuel Micha
et al.

[Journal Article]
SplineLib: A modern multi-purpose C++ spline library
In: Advances in engineering software, 146, 102826, 2020
[DOI: 10.1016/j.advengsoft.2020.102826]

Frings, Markus
Hosters, Norbert Michael
Müller, Corinna
Spahn, Max
Susen, Christoph Johann
et al.

[Journal Article]
Heating behaviour of plasma sprayed TiOx/Cr2O3 coatings for injection moulding
In: Surface and coatings technology, 399, 126199, 2020
[DOI: 10.1016/j.surfcoat.2020.126199]

Bobzin, Kirsten
Wietheger, Wolfgang
Knoch, Martin Andreas
Schacht, Andreas (Corresponding author)

[Journal Article]
Non-Isothermal Crystallisation Kinetics of Polypropylene at High Cooling Rates and Comparison to the Continuous Two-Domain pvT Model
In: Polymers, 12 (7), 1515, 2020
[DOI: 10.3390/polym12071515]

Alms, Jonathan Paul (Corresponding author)
Hopmann, Christian
Wang, Jian (Corresponding author)
Hohlweck, Tobias

[Journal Article]
Development of a novel control strategy for a highly segmented injection mold tempering for inline part warpage control
In: Polymer engineering & science, 60 (10), 2428-2438, 2020
[DOI: 10.1002/pen.25481]

Hopmann, Christian (Corresponding author)
Kahve, Cemi Emre
Schmitz, Mauritius

[Dissertation / PhD Thesis]
Inverse shape design in injection molding based on the finite element method, 2020
[DOI: 10.18154/RWTH-2020-07871]

Zwicke, Florian

[Journal Article]
Mushy zone solidification in a static thermal gradient : The effect of dendrite orientation
In: Materialia, 11, 100744, 2020
[DOI: 10.1016/j.mtla.2020.100744]

Boussinot, Guillaume (Corresponding author)
Apel, Markus
Hecht, Ulrike

[Journal Article]
Powder based laser material deposition on edges
In: Journal of laser applications : JLA, 32 (3), 032001, 2020
[DOI: 10.2351/7.0000095]

Bold, Marie-Noemi
Linnenbrink, Stefanie
Pirch, Norbert
Gasser, Andrés
Mund, Jana
et al.

[Contribution to a book, Journal Article]
Increasing the manufacturing efficiency of WAAM by advanced cooling strategies
In: Welding in the world, 64 (8), 1409-1416, 2020
[DOI: 10.1007/s40194-020-00930-2]

Reisgen, Uwe
Sharma, Rahul
Mann, Samuel Micha
Oster, Lukas Emmanuel (Corresponding author)

[Journal Article]
Comparison of Residual Stress Measurements Conducted by X-ray Stress Analysis and Incremental Hole Drilling Method
In: Journal of thermal spray technology : JTST, 29 (6), 1218-1228, 2020
[DOI: 10.1007/s11666-020-01056-z]

Bobzin, Kirsten
Wietheger, Wolfgang
Knoch, Martin Andreas
Schacht, Andreas (Corresponding author)
Reisgen, Uwe
et al.

[Journal Article]
Concept for the calculation of the distribution of heat input in the cathode area by GMA welding
In: Welding in the world, 64 (9), 1605-1614, 2020
[DOI: 10.1007/s40194-020-00929-9]

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Schiebahn, Alexander
Reisgen, Uwe

[Journal Article]
Investigation on the melt ejection and burr formation during laser fusion cutting of stainless steel
In: Journal of laser applications : JLA, 32 (2), 022068, 2020
[DOI: 10.2351/7.0000074]

Stoyanov, S.
Petring, D.
Arntz, Dennis
Günder, M.
Gillner, A.
et al.

[Journal Article]
Comparing 1070 nm and 515 nm Wavelength Laser Beam Sources in Terms of Efficiency for Laser Microwelding Copper
In: Lasers in engineering : LIE, 46 (1/4), 187-202, 2020

Hummel, Marc Daniel
Haeusler, André
Olowinsky, A.
Gillner, Arnold
Poprawe, Reinhart

[Journal Article]
Influence of direct electric current on wetting behavior during brazing
In: Frontiers of mechanical engineering, 15 (3), 496-503, 2020
[DOI: 10.1007/s11465-019-0582-6]

Bobzin, Kirsten
Wietheger, Wolfgang
Hebing, Julian
Zhao, Lidong
Schmidt, Alexander (Corresponding author)
et al.

[Contribution to a conference proceedings, Journal Article]
Investigating plasma keyhole welding with multiple wires for fusion welding with chemically graded weld seams
In: Journal of advanced joining processes, 1, 100024, 2020
[DOI: 10.1016/j.jajp.2020.100024]

Akyel, Fatma Nur (Corresponding author)
Oster, Lukas Emmanuel
Olschok, Simon
Sharma, Rahul
Reisgen, Uwe

[Journal Article]
Influence of mill scale on weld bead geometry and thermal cycle during GTA welding of high-strength steels
In: Welding in the world, 64, 1175-1183, 2020
[DOI: 10.1007/s40194-020-00910-6]

Sharma, Rahul (Corresponding author)
Reisgen, Uwe

[Contribution to a book, Journal Article]
Processing of Keyhole Depth Measurement Data during Laser Beam Micro Welding
In: Proceedings of the Institution of Mechanical Engineers / L, 234 (5), 722-731, 2020
[DOI: 10.1177/1464420720916759]

Hollatz, Sören (Corresponding author)
Hummel, Marc Daniel
Jaklen, Lea
Lipnicki, Wiktor
Olowinsky, Alexander
et al.

[Journal Article]
Prediction of effective elastic properties of a polypropylene component by an enhanced multiscale simulation of the injection molding process
In: Mechanics of materials, 140, 103225, 2019
[DOI: 10.1016/j.mechmat.2019.103225]

Laschet, Gottfried (Corresponding author)
Nokhostin, Hamed
Koch, Simon Christian
Meunier, Marc
Hopmann, Christian

[Journal Article]
Process dependence of pressure-specific volume-temperature measurement for amorphous polymer : Acrylonitrile-butadiene-styrene
In: Polymer testing, 81, 106232, 2019
[DOI: 10.1016/j.polymertesting.2019.106232]

Wang, Jian (Corresponding author)
Hopmann, Christian
Schmitz, Mauritius
Hohlweck, Tobias

[Journal Article]
Effects of evaporation-determined model of arc-cathode coupling on weld pool formation in GMAW process simulation
In: Welding in the world, 64 (5), 847-856, 2020
[DOI: 10.1007/s40194-020-00878-3]

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Sharma, Rahul
Reisgen, Uwe

[Journal Article]
Influence of the Injector Head Geometry on the Particle Injection in Plasma Spraying
In: Journal of thermal spray technology : JTST, 29 (4), 534-545, 2020
[DOI: 10.1007/s11666-020-01009-6]

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin Andreas
Heinemann, Hendrik (Corresponding author)

[Journal Article]
Finite element simulation of residual stress induced by high energy beam welding in dual phase steel
In: Lasers in manufacturing and materials processing, 7, 154-176, 2020
[DOI: 10.1007/s40516-020-00112-4]

Komerla, Krishna Chaitanya (Corresponding author)
Gach, Stefan
Akyel, Fatma Nur
Vossel, Thomas
Reisgen, Uwe
et al.

[Contribution to a book, Contribution to a conference proceedings]
Dissimilar material combination in laser beam welding : Reduction of distortion and residual stress
In: High-Power Laser Materials Processing : Applications, Diagnostics, and Systems IX : 4-5 February 2020, San Francisco, California, United States / Stefan Kaierle, Stefan W. Heinemann Editors ; Sponsored and Published by, 112730B, 1-14, 2020
[DOI: 10.1117/12.2543866]

Akyel, Fatma Nur (Corresponding author)
Olschok, Simon
Reisgen, Uwe

[Journal Article]
Continuous Two-Domain Equations of State for the Description of the Pressure-Specific Volume-Temperature Behavior of Polymers
In: Polymers, 12 (2), 409, 2020
[DOI: 10.3390/polym12020409]

Wang, Jian (Corresponding author)
Hopmann, Christian
Röbig, Malte
Hohlweck, Tobias (Corresponding author)
Kahve, Cemi Emre
et al.

[Journal Article]
Erratum: "Residual stress reduction of laser beam welds by use of low-transformation temperature (LTT) filler materials in carbon manganese steels - In situ diagnostic: Image correlation" [J. Laser Appl. 30, 032416 (2018)]
In: Journal of laser applications : JLA, 32 (1), 019901, 2020
[DOI: 10.2351/1.5133938]

Gach, Stefan
Olschok, Simon
Arntz, Dennis
Reisgen, Uwe

[Contribution to a conference proceedings]
Simulation of the Temperature Profile on the Cutting Edge in Laser Fusion Cutting
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 2019

Halm, Ulrich
Niessen, Markus
Arntz, Dennis
Gillner, Arnold
Schulz, Wolfgang

[Contribution to a conference proceedings]
Simulation of solidification microstructures under thermal conditions of laser beam welding
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 2019

Apel, Markus (Corresponding author)
Stryzhyboroda, Oleg
Boussinot, Guillaume
Böttger, Bernd

[Contribution to a book, Journal Article]
Einfluss der Spaltbildung und der schrumpfungsbedingten Kontaktdrücke auf die Entwicklung des Wärmeübergangs im Schwerkraftkokillenguss
In: Giesserei / Special, 2019 (2), 26-33, 2019

Vossel, Thomas
Pustal, Björn
Bührig-Polaczek, Andreas

[Contribution to a book, Journal Article]
Einfluss der Kokillentemperierung auf die Erstarrung beim Dauerformgießprozess
In: Giesserei / Special, 2019 (2), 34-45, 2019

Vossel, Thomas
Wolff, Nino Kornelius
Pustal, Björn
Bührig-Polaczek, Andreas

[Journal Article]
Laser-aided directed energy deposition of metal powder along edges
In: International journal of heat and mass transfer, 143, 118464, 2019
[DOI: 10.1016/j.ijheatmasstransfer.2019.118464]

Pirch, N.
Linnenbrink, S.
Gasser, A.
Schleifenbaum, Johannes Henrich (Corresponding author)

[Contribution to a conference proceedings]
Study of Laser Metal Deposition of IN718 on Inclined Planes: Influence of Inclination on Height and Width of Deposited Material
In: [Metal Additive Manufacturing Conference 2019, MAMC2019, 2019-11-25 - 2019-11-27, Örebro, Sweden], 2019

Bold, Marie-Noemi
Zielinski, Jonas
Ziegler, Stephan
Schleifenbaum, Johannes Henrich

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Comparison of the Thermal Properties of Industrially Used Die Coatings and a Plasma Sprayed YSZ Coating for Gravity Die Casting Applications
In: Transactions of the American Foundry Society, 127, 309-314, 2019

Wolff, Nino Kornelius
Krampe, Jan
Vroomen, Uwe
Bührig-Polaczek, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Identification of Relevant Parameters for a Gap and Pressure Dependent Heat Transfer Model for Different Cooling Conditions in Gravity Die Casting
In: [Liquid Metal Processing & Casting Conference, LMPC 2019, 2019-09-08 - 2019-09-11, Birmingham, UK], 319-326, 2019

Wolff, Nino Kornelius
Ahmadein, Mahmoud
Pustal, Björn
Bührig-Polaczek, Andreas

[Contribution to a conference proceedings]
Effects of Beam Power and Power Density Distribution on Process and Quality Issues during Fiber Laser Cutting of Stainless Steel Sheet Metal
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 2019

Petring, Dirk
Arntz, Dennis
Stoyanov, Stoyan
Schneider, Frank

[Journal Article]
YSZ-Dauerbeschichtung als Alternative zu Kokillenschlichten?
In: Giesserei : die Zeitschrift für Technik, Innovation und Management, 106, 24-31, 2019

Wolff, Nino Kornelius
Krampe, Jan
Vroomen, Uwe
Bührig-Polaczek, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Thermo-elasto-viscoplastic constitutive laws for metallic alloys during their solidification
In: Joint 5th International Conference on Advances in Solidification Processes (ICASP-5) & 5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5) : 17-21 June 2019, Salzburg, Austria / Charles-André Gandin, MINES ParisTech, France; Menghuai Wu, University of Leoben, Austria, 012083, 2019
[DOI: 10.1088/1757-899X/529/1/012083]

Laschet, G. M. (Corresponding author)
Behnken, H. (Corresponding author)

[Contribution to a conference proceedings]
Quantitative Analysis of the Temporal Distance between Melt Waves on the Cutting Front Apex during Laser Fusion Cutting of Stainless-Steel Sheet Metal with 1 Micron Wavelength
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 9 Seiten, 2019

Arntz, Dennis
Petring, Dirk
Schneider, Frank
Stoyanov, Stoyan
Halm, Ulrich
et al.

[Contribution to a conference proceedings]
Simulative and experimental validation of an inversed cooling channel design for injection molds
In: 77th Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2019; Detroit; United States; 18 March 2019 through 21 March 2019 : Annual Technical Conference - ANTEC, Conference Proceedings, 6 Seiten, 2019

Hopmann, Christian
Fischer, Torben
Hohlweck, Tobias (Corresponding author)

[Journal Article]
Modeling of pvT behavior of semi-crystalline polymer based on the two-domain Tait equation of state for injection molding
In: Materials and design, 183, 108149, 2019
[DOI: 10.1016/j.matdes.2019.108149]

Wang, Jian (Corresponding author)
Hopmann, Christian
Schmitz, Mauritius
Hohlweck, Tobias
Wipperfürth, Jens

[Contribution to a book, Contribution to a conference proceedings]
Automatic cooling channel design for injection moulds
In: Proceedings of PPS-33 : the 33rd International Conference of the Polymer Processing Society - conference papers : Cancun, Mexico, 10-14 December 2017 / editors Octavio Manero, Fausto Calderas, 030004, 1-6, 2019
[DOI: 10.1063/1.5121657]

Hopmann, Christian
Theunissen, Matthias (Corresponding author)
Schneppe, Tobias
Schmitz, Mauritius

[Journal Article]
Simplex space-time meshes in thermally coupled two-phase flow simulations of mold filling
In: Computers & fluids, 192, 104261, 2019
[DOI: 10.1016/j.compfluid.2019.104261]

Karyofylli, Violeta (Corresponding author)
Wendling, Loic
Make, Michael Karl Petronella
Hosters, Norbert Michael
Behr, Marek

[Contribution to a book, Contribution to a conference proceedings]
Macroscopic Modelling of an Agglomerated and Sintered Particle in Air Plasma Spraying
In: ITSC 2019 : international thermal spray conference and exposition : 2019 conference proceedings / organized by: Thermal Spray Society, ASM International, DVS - German Welding Society, 8 Seiten, 2019

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin Andreas
Alkhasli, Ilkin (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
Axisymmetric two-phase flow simulations on space-time meshes
In: Proceedings in applied mathematics and mechanics : PAMM, 19 (1), e201900409, 2019
[DOI: 10.1002/pamm.201900409]

Karyofylli, Violeta (Corresponding author)
Kamaldinova, Liubov
Simon, Marek Sebastian
Mokrov, Oleg
Reisgen, Uwe
et al.

[Contribution to a conference proceedings]
Effizienzsteigerung von Wire and Arc Additive Manufacturing durch Aerosolkühlung und Mehrdrahttechnologie
In: 1. Fachtagung Additive Manufacturing : 12. November 2019, Halle (Saale) : Vortragsband / DVS SLV Halle, 36-42, 2019

Reisgen, Uwe
Sharma, Rahul
Oster, Lukas Emmanuel (Corresponding author)
Mann, Samuel Micha

[Journal Article]
Influence of measurement processes on pressure-specific volume-temperature relationships of semi-crystalline polymer: Polypropylene
In: Polymer testing, 78, 105992, 2019
[DOI: 10.1016/j.polymertesting.2019.105992]

Wang, Jian (Corresponding author)
Hopmann, Christian
Schmitz, Mauritius
Hohlweck, Tobias (Corresponding author)

[Contribution to a conference proceedings, Journal Article]
3D printing in steel construction with the automated Wire Arc Additive Manufacturing
In: ce/papers, 3 (3/4), 577-583, 2019
[DOI: 10.1002/cepa.1103]

Kühne, Ronny (Corresponding author)
Feldmann, Markus
Citarelli, Sandro
Reisgen, Uwe
Sharma, Rahul
et al.