[Journal Article]
Inverse design based on nonlinear thermoelastic material models applied to injection molding
In: Finite elements in analysis and design, 165, 65-76, 2019
[DOI: 10.1016/j.finel.2019.07.002]

Zwicke, Florian (Corresponding author)
Elgeti, Stefanie Nicole

[Contribution to a book, Contribution to a conference proceedings]
Influence of tin on the wetting behaviour of aluminum
In: Brazing, high temperature brazing and diffusion bonding : LÖT 2019 : lectures and posters of the 12th International Conference taking place in Aachen on 21th to 23th May 2019 / organised by DVS, 240-246, 2019

Bobzin, Kirsten
Öte, Mehmet
Wiesner, Stefanie
Schmidt, Alexander
Aretz, Anke
et al.

[Contribution to a conference proceedings]
Evaluation of Offline Path Planning for Laser Metal Deposition on Freeform Surfaces
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 7 Seiten, 2019

Bold, Marie-Noemi (Corresponding author)
Pirch, Nobert
Ziegler, Stephan
Schleifenbaum, Johannes Henrich

[Contribution to a conference proceedings]
Microstructure dependent effective elastic properties of a polypropylene plate via a multiscale simulation of the injection moulding process
In: [Clausthal-Göttingen International Workshop on Simulation Science, 2019-05-08 - 2019-05-10, Clausthal-Zellerfeld, Germany], 2019

Laschet, Gottfried (Corresponding author)
Koch, Simon Christian
Nokhostin, Hamed
Hopmann, Christian

[Contribution to a book, Contribution to a conference proceedings]
Eigenspannungs- und Verzugssimulation von Kohlenstoff-Mangan-Stählen im Elektronenstrahlschweißprozess
In: 39. Assistentenseminar Füge- und Schweißtechnik : Vorträge der gleichnamigen Veranstaltung in Eupen vom 12. bis 14. September 2018 / Institut für Schweißtechnik und Fügetechnik, RWTH Aachen [und 6 weitere] ; vom Institut für Schweißtechnik und Fügetechnik der RWTH Aachen veranstaltet, 78-86, 2019

Akyel, Fatma Nur (Corresponding author)
Olschok, Simon
Reisgen, Uwe

[Contribution to a conference proceedings]
In-situ diagnostic in laser beam welds with digital image correlation : Reduction of residual stress and distortion in laser beam welds using low-transformation-temperature (LTT) filler materials
In: Lasers in Manufacturing 2019 : Munich ICM, Internationales Congress Center München, Germany, June 24-27, 2019 : World of Photonics Congress / WLT, LiM 2019, 102, 6 Seiten, 2019

Reisgen, Uwe
Olschok, Simon
Akyel, Fatma Nur (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
A study of coupled influence of evaporation and fluid flow inside a weld pool on welded seam formation in GMAW
In: Mathematical Modelling of Weld Phenomena 12 / edited by Christof Sommitsch, Institute of Materials Science, Joining and Forming, Graz University of Technology, Norbert Enzinger, Institute of Materials Science, Joining and Forming, Graz University of Technology, Peter Mayr, Institute of Joining and Assembly, Technische Universität Chemnitz ; TU Graz, Graz University of Technology, 81-90, 2019
[DOI: 10.3217/978-3-85125-615-4-06]

Mokrov, Oleg
Lisnyi, Oleksii (Corresponding author)
Simon, Marek Sebastian
Schiebahn, Alexander
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Evaporation-determined model for arc heat input in the cathode area by GMA welding
In: Mathematical Modelling of Weld Phenomena 12 / edited by Christof Sommitsch, Institute of Materials Science, Joining and Forming, Graz University of Technology, Norbert Enzinger, Institute of Materials Science, Joining and Forming, Graz University of Technology, Peter Mayr, Institute of Joining and Assembly, Technische Universität Chemnitz ; TU Graz, Graz University of Technology, 953-964, 2019
[DOI: 10.3217/978-3-85125-615-4-50]

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Schiebahn, Alexander
Reisgen, Uwe

[Contribution to a book, Journal Article]
Plasma multiwire technology with alternating wire feed for tailor-made material properties in wire and arc additive manufacturing
In: Metals : open access journal, 9, 745, 2019
[DOI: 10.3390/met9070745]

Reisgen, Uwe
Sharma, Rahul
Oster, Lukas Emmanuel (Corresponding author)

[Contribution to a book, Contribution to a conference proceedings]
Modelling of particle impact using modified momentum source method in thermal spraying
In: 21st Chemnitz Seminar on Materials Engineering : 6-7 March 2019, Chemnitz, Germany 21. Werkstofftechnisches Kolloquium, 012003, 2019
[DOI: 10.1088/1757-899X/480/1/012003]

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin Andreas
Alkhasli, Ilkin
Dokhanchi, Seyed Ruhollah (Corresponding author)

[Contribution to a book, Journal Article]
Arc-cathode attachment in GMA welding
In: Journal of physics / D, 52 (36), 364003, 2019
[DOI: 10.1088/1361-6463/ab2bd9]

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Sharma, Rahul
Reisgen, Uwe

[Journal Article]
Influence of spatial power modulation on pore and crack formation in laser beam welding of aluminum
In: Journal of laser applications : JLA, 31 (2), 022013, 2019
[DOI: 10.2351/1.5085460]

Heinen, Paul
Eichler, Jonas Felix Lambert
Haeusler, André
Olowinsky, Alexander
Aden, Mirko
et al.

[Journal Article]
In situ high speed diagnosis - A quantitative analysis of melt flow dynamics inside cutting kerfs during laser fusion cutting with 1 μm wavelength
In: Journal of laser applications : JLA, 31 (2), 022206, 2019
[DOI: 10.2351/1.5096091]

Arntz, Dennis
Petring, Dirk
Schneider, Frank
Poprawe, Reinhart

[Contribution to a book, Contribution to a conference proceedings]
A concept of an injection compression mould for non-invasive ultrasound tomographic temperature measurements
In: Proceedings of the Europe/Africa Conference Dresden 2017 - Polymer Processing Society PPS / Dresden, Germany, 27-29 June 2017 / editors Udo Wagenknecht, Petra Pötschke (Leibniz-Institut für Polymerforschung Dresden e.V., Dresden, Germany), Sven Wiessner (Technische Universität Dresden, Dresden, Germany), Michael Gehde (Technische Universität Chemnitz, Chemnitz, Germany), 070004, 1-4, 2019
[DOI: 10.1063/1.5084848]

Wipperfürth, Jens (Corresponding author)
Hopmann, Christian

[Contribution to a book, Contribution to a conference proceedings]
Temperature distribution on thermally sprayed heating conductor coatings
In: 21st Chemnitz Seminar on Materials Engineering, 1-11, 2019
[DOI: 10.1088/1757-899X/480/1/012002]

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin Andreas
Alkhasli, I. (Corresponding author)

[Journal Article]
The effect of beam oscillations on the microstructure and mechanical properties of electron beam welded steel joints
In: The international journal of advanced manufacturing technology, 102 (9/12), 2919-2931, 2019
[DOI: 10.1007/s00170-019-03355-4]

Komerla, Krishna Chaitanya (Corresponding author)
Gach, Stefan
Vossel, Thomas
Schwedt, Alexander
Bührig-Polaczek, Andreas
et al.

[Journal Article]
Macroscopic particle modeling in air plasma spraying
In: Surface and coatings technology, 364, 449-456, 2018
[DOI: 10.1016/j.surfcoat.2018.07.056]

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin Andreas
Alkhasli, Ilkin (Corresponding author)

[Journal Article]
Determination of the influence of welding parameters on the efficiency of electron beam welding by measurement of backscattered electrons
In: Vacuum : surface engineering, surface instrumentation & vacuum technology, 159, 182-185, 2018
[DOI: 10.1016/j.vacuum.2018.10.039]

Reisgen, Uwe
Olschok, Simon
Krichel, Thomas (Corresponding author)
Gach, Stefan

[Contribution to a book, Contribution to a conference proceedings]
Accelerated and Directed Diffusion during Electric Current-Assisted Brazing
In: 7th International Brazing and Soldering Conference 2018 : New Orleans, Lousiana, USA, 15-18 April 2018 / editors: Robin Gourley, Charles Walker ; sponsored and published by the American Welding Society, 126-129, 2019

Bobzin, Kirsten
Öte, Mehmet
Wiesner, Stefanie
Schmidt, Alexander

[Contribution to a conference proceedings, Journal Article]
Numerical Design for Primary Shaping Manufacturing Processes
In: Proceedings in applied mathematics and mechanics, 18 (1), e201800218, 2018
[DOI: 10.1002/pamm.201800218]

Zwicke, Florian (Corresponding author)
Schneppe, Tobias
Hopmann, Christian
Elgeti, Stefanie Nicole

[Contribution to a conference proceedings]
Controlling the local part properties using segmented temperature control in injection moulding
In: [ANTEC 2018 Conference and Tradeshow, ANTEC 2018, 2018-05-07 - 2018-05-10, Orlando, Florida, USA], 2018

Hopmann, Christian
Schmitz, Mauritius (Corresponding author)

[Book, Dissertation / PhD Thesis]
Simulation hochdynamischer Vorgänge in der Schmelze beim Laserstrahlschneiden
In: Ingenieurwissenschaften, 2018

Halm, Ulrich

[Journal Article]
Assessment of mechanical properties in high-strength steel weld metals by means of phase transformation temperature
In: Welding in the world, 62 (6), 1227-1236, 2018
[DOI: 10.1007/s40194-018-0605-7]

Sharma, Rahul (Corresponding author)
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Evaporation-based model for plasma-cathode attachement in GMA welding
In: Proceedings of the XXIInd International Conference on Gas Discharges and their Applications / editors: Prof. Zoran Lj. Petrović, Dr. Nevena Puač, Dr. Saša Dujko, Dr. Nikola Škoro ; Serbian Academy of Sciences and Arts, Institute of Physics, University of Belgrade. - Volume 2, 660-661, 2018

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Schiebahn, Alexander
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Evaporation-determined model for cathodic heating in GMA welding
In: Proceedings of the XXIInd International Conference on Gas Discharges and their Applications / editors: Prof. Zoran Lj. Petrović, Dr. Nevena Puač, Dr. Saša Dujko, Dr. Nikola Škoro ; Serbian Academy of Sciences and Arts, Institute of Physics, University of Belgrade. - Volume 1, 87-90, 2018

Mokrov, Oleg
Simon, Marek Sebastian (Corresponding author)
Schiebahn, Alexander
Reisgen, Uwe

[Journal Article]
Temperature field and residual stress distribution for laser metal deposition
In: Journal of laser applications, 30 (3), 032503, 2018
[DOI: 10.2351/1.5040634]

Pirch, Norbert
Niessen, Markus
Linnenbrink, Stefanie
Schopphoven, Thomas
Gasser, Andres
et al.

[Contribution to a conference proceedings, Journal Article]
Quantitative study of melt flow dynamics inside laser cutting kerfs by in-situ high-speed video-diagnostics
In: Procedia CIRP, 74, 640-644, 2018
[DOI: 10.1016/j.procir.2018.08.057]

Arntz, Dennis (Corresponding author)
Petring, Dirk
Stoyanov, Stoyan
Quiring, N.
Poprawe, Reinhart

[Journal Article]
In situ investigation of production processes in a large chamber scanning electron microscope
In: Ultramicroscopy, 193, 151-158, 2018
[DOI: 10.1016/j.ultramic.2018.07.002]

Aretz, Anke
Ehle, Lisa Christine
Häusler, André
Bobzin, Kirsten
Öte, Mehmet
et al.

[Journal Article]
Development of a Segmented Temperature Control for Targeted Solidification in Injection Molding
In: International polymer processing, 33 (2), 206-216, 2018
[DOI: 10.3139/217.3452]

Hopmann, Christian
Schmitz, Mauritius (Corresponding author)
Dornebusch, Hanna

[Contribution to a book, Contribution to a conference proceedings]
Digitalisierung der Werkzeugentwicklung beim Präzisionsspritzgießen
In: Kunststoffindustrie 4.0 : 29. Internationales Kolloquium Kunststofftechnik / Herausgeber: Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk an der RWTH Aachen, Lehrstuhl für Kunststoffverarbeitung, Prof. Dr.-Ing Christian Hopmann, 489-532, 2018

Hopmann, Christian
Wehr, H.
Schmitz, Mauritius
Schneppe, Tobias (Corresponding author)
Theunissen, Matthias

[Journal Article]
Residual stress reduction of laser beam welds by use of low-transformation-temperature (LTT) filler materials in carbon manganese steels - In situ diagnostic: Image correlation
In: Journal of laser applications : JLA, 30 (3), 032416, 2018
[DOI: 10.2351/1.5040599]

Gach, Stefan (Corresponding author)
Olschok, Simon
Arntz, Dennis
Reisgen, Uwe

[Contribution to a book, Contribution to a conference proceedings]
Adaptive temporal refinement in injection molding
In: Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018 / editors: Livan Fratini, Rosa Di Lorenzo, Gianluca Buffa, Guiseppe Ingaro (University of Palermo, Palermo, Italy). - A, 2018
[DOI: 10.1063/1.5034934]

Karyofylli, Violeta (Corresponding author)
Schmitz, Mauritius (Corresponding author)
Hopmann, Christian
Behr, Marek

[Book, Dissertation / PhD Thesis]
Inverse thermische Spritzgießwerkzeugauslegung auf Basis des lokalen Kühlbedarfs
In: IKV-Berichte aus der Kunststoffverarbeitung 283, 2018

Nikoleizig, Philipp

[Contribution to a book]
Schweißprozesssimulation - Simulationsgestützte Erforschung der physikalischen Prozesse verschiedener Schweissverfahren
In: ISF, Welding and Joining Institute, RWTH Aachen University / herausgegeben vom Institut für Wissenschaftliche Veröffentlichungen und der ALPHA Informationsgesellschaft mbH ; redaktionelle Zusammenarbeit: Institut für Schweißtechnik und Fügetechnik (IFS) an der RWTH Aachen University, 60-63, 2018

Simon, Marek Sebastian (Corresponding author)
Schmidt, Andre
Mokrov, Oleg

[Journal Article]
Minimization of Warpage for Injection Molded Parts by Inverse Thermal Mold Design
In: International polymer processing, 33 (1), 110-116, 2018
[DOI: 10.3139/217.3451]

Hopmann, Christian
Nikoleizig, Philipp
Dornebusch, Hanna (Corresponding author)
Schneppe, Tobias

[Journal Article]
Numerical investigation of droplet impact on the welding pool in gas metal arc welding
In: Materials science and engineering technology = Materialwissenschaft und Werkstofftechnik, 48 (12), 1206-1212, 2017
[DOI: 10.1002/mawe.201700147]

Mokrov, Oleg
Lisnyi, Oleksii (Corresponding author)
Simon, Marek Sebastian
Reisgen, Uwe
Laschet, G.
et al.

[Journal Article]
Influence on martensite-start-temperature and volume expansion of low-transformation-temperature materials used for residual stress relief in beam welding
In: Materialwissenschaft und Werkstofftechnik, 48 (12), 1276-1282, 2017
[DOI: 10.1002/mawe.201700159]

Reisgen, Uwe
Olschok, Simon
Sharma, Rahul
Gach, Stefan (Corresponding author)

[Journal Article]
Residual stress measurement in AlSi alloys
In: Materialwissenschaft und Werkstofftechnik = Materialwissenschaft und Werkstofftechnik, 48 (12), 1270-1275, 2017
[DOI: 10.1002/mawe.201700157]

Reisgen, Uwe
Sharma, Rahul (Corresponding author)
Gach, Stefan
Olschok, Simon
Francis, J.
et al.

[Journal Article]
Characterisation of quasi-stationary temperature fields in laser welding by infrared thermography
In: Materials science and engineering technology = Materialwissenschaft und Werkstofftechnik, 48 (12), 1283-1289, 2017
[DOI: 10.1002/mawe.201700160]

Francis, J. A. (Corresponding author)
Gach, Stefan (Corresponding author)
Olschok, Simon
Reisgen, Uwe
Häusler, André
et al.

[Conference Presentation]
In-situ-visualization of multiple reflections on the cut flank during laser cutting with 1 micron wavelength
In: International Congress on Applications & electro-optics Atlanta, GA 2017-10-22 - 2017-10-26, 2017

Arntz, Dennis
Petring, Dirk
Stoyanov, Stoyan
Jansen, Ulrich
Schneider, Frank
et al.

[Journal Article]
In-situ strain measurement of submerged arc welding process through application of electronic Speckle pattern interferometry
In: Journal of Welding and Joining, 35 (4), 82-88, 2017
[DOI: 10.5781/JWJ.2017.35.4.12]

Reisgen, Uwe
Sharma, Rahul (Corresponding author)

[Journal Article]
Confirmation of tensile residual stress reduction in electron beam welding using low transformation temperature materials (LTT) as localized metallurgical injections - Part 2: Residual stress measurement
In: Materials testing, 59 (7-8), 618-624, 2017
[DOI: 10.3139/120.111046]

Gach, Stefan (Corresponding author)
Olschok, Simon
Francis, John Anthony
Reisgen, Uwe

[Journal Article]
Comparative study of phase transformation temperatures in high strength steel weld metals
In: Materials testing = Materialprüfung, 59 (4), 344-347, 2017
[DOI: 10.3139/120.111003]

Sharma, Rahul (Corresponding author)
Reisgen, Uwe

[Journal Article]
Nachweis der Zugeigenspannungsreduzierung in Electronenstrahlschweißnähten durch Verwendung von Low-Transformation-Temperature Werkstoffen (LTT) als lokale metallurgische Injektion : Teil 1: Metallographische Analyse
In: Materials testing, 59 (2), 148-154, 2017
[DOI: 10.3139/120.110957]

Gach, Stefan (Corresponding author)
Schwedt, Alexander
Olschok, Simon
Reisgen, Uwe
Mayer, Joachim

[Contribution to a book, Contribution to a conference proceedings]
Comparison of submerged arc welding process modification influence on thermal strain by in-situ neutron diffraction
In: Residual stresses 2016 : ICRS-10 : 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July, 2016 / Thomas M. Holden, Ondrej Muránsky, Lyndon Edwards (Institute of Materials Engineering, Australian Nuclear Science & Technology Organization, Locked Bag 2001, Kirrawee DC, Sydney, NSW 2232, Australia), 533-538, 2017
[DOI: 10.21741/9781945291173-90]

Sharma, Rahul (Corresponding author)
Reisgen, Uwe
Hofmann, Michael

[Contribution to a book, Contribution to a conference proceedings]
Mathematical model of an arc welding weld seam formation on the basis of three dimensional CFD simulations
In: Mathematical modelling of weld phenomena 11 : contains the papers presented at the 11th International Seminar 'Numerical Analysis of Weldability', held from September 27 to 30, 2015 at Schloss Seggau near Graz, Austria / edited by Christof Sommitsch (Institute of Materials Science and Welding, Graz University of Technology), Norbert Enzinger (Institute of Materials Science and Welding, Graz University of Technology), Peter Mayr (Institute of Joining and Assembly, Technische Universität Chemnitz) ; TU Graz, Graz University of Technology, 753-772, 2016

Reisgen, Uwe
Mokrov, Oleg (Corresponding author)
Lisnyi, Oleksii

[Dissertation / PhD Thesis]
Understanding multi-arc plasma spraying
In: Schriftenreihe Oberflächentechnik 44, 2016

Öte, Mehmet

[Journal Article]
Nutzung von Low-Transformation-Temperature-Werkstoffen (LTT) zur Eigenspannungsreduzierung im Elektronenstrahlschweißprozess
In: Materialwissenschaft und Werkstofftechnik, 47 (7), 589-599, 2016
[DOI: 10.1002/mawe.201600549]

Reisgen, Uwe
Olschok, Simon
Gach, Stefan (Corresponding author)